[Linman]

I have configured A800 to register with my GK using E164 id as 55667788. When i place a call to A800 using the same id, the call got rejected by the A800. Find below the log from A800.
—–
CH : 59069930:h323[0]: h323mgr:RcvIncomingCall
CH : 59069947:h323[0]: ocall:RcvSetup, my media type=9
CH : 59069947:bandwidth info: max=-1 cur=12600.
CH : 59069947:Fast start element present.
CH : 59069947:Setting remote rtp port=W.X.Y.Z:23566.
CH : 59069947:Remote side packet saver version = 2.
CH : 59069947:CallInfo[0xd8ac30]: origCalled.digit(55667788)
.
CH : 59069947:h323[1512/0]: ocall:stackSendCallProc
CH : 59069950:Routing requested for: public(0) orig=55667788 public(1) norm
alized=55667788 route code= tg=0.
CH : 59069950:0 match(es) found:
CH : 59069950:Route response(1512): result=0 cause=34.
CH : 59069950:CallInfo[0xd8ac30]: cdr callid(5e8) rmtcallid(0) calltype(1) d
estnumtype(1).
CH : 59069950:CallInfo[0xd8ac30]: cdr dest(55667788) orig(2000 4) remote()
pin().
CH : 59069950:CallInfo[0xd8ac30]: cdr icline(ffffffff) icport(cb91be03) otli
ne(ff) otport(1).
CH : 59069951:CdrManager::addCdr: 1185 Return.
CH : 59069951:CallInfo[0xd8ac30]: sendFailed Event cause=34.
CH : 59069951:CdrManager(0x5d13c4): account =A.B.C.D.
CH : 59069951:CdrManager[0x5d13c4]: cause =34.
CH : 59069951:CdrManager[0x5d13c4]: send stopAccount.
—

Any clue???

[www.blue-lava.co.uk]

From the same prompt can you type gk table for us to see what is the given format?

Regards

dwray@blue-lava.co.uk

[Linman]

Please find the result below:

Quintum:UNIT1> gk table
Quintum:UNIT1> Quintum:UNIT1>
Zone DirectoryNumbers
Public DirectoryNumber Tree
Private DirectoryNumber Tree

Network DirectoryNumbers
Public DirectoryNumber Tree
Private DirectoryNumber Tree

[Teodor Georgiev]

You have to setup also LAM or LDN numbers on the trunk group so, quintum will know where to temrinate the call.

LAM is for FXO lines, while LDN is for FXS ones.

Simply said 🙂

[linman]

Cud u guide me to setup LAM or LDN numbers on the trunk group.

[Teodor Georgiev]

On Quintum website you can download freely their documentation.

[Dode]

Hi All,

i have a Quintum 2 ports and 4 ports.
I am facing a problem in applying a telephone numbers (identifing numbers) to the unit ports, can any one help?

Appreciating,,

[LoneRanger]

CH : 59069950:0 match(es) found:
CH : 59069950:Route response(1512): result=0 cause=34.

Your Tenor does not know where to send this call internally. You need to have the incoming number in the pbxtg 1# huntpubldn 55667788

[Author]

Posts