Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Simple Quintum Tenor configuration

  • This topic has 3 replies, 1 voice, and was last updated 20 years ago by sjosema.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #26688
    sjosema
    Guest

    Hi,

    i have Quintum Tenor and I can’t get very simple configuration to work ๐Ÿ˜‰

    I have analog line connected to PSTN port and I need quintum to accept
    calls from Internet and route it to PSTN lines.

    Line connected to PSTN works (tested with quintum “test” command), Quintum
    is configured to have public IP and gateway and I set other bunch of other
    parameters that I find in documentation…

    When I try to connect to Quintum with h323 clients, like ohphone or gnomeeting,
    I get messages like “Congested link to remote party” or “Congested link to “Io_address:1720″”

    I need Quintum to act just like simple gateway between IP network and PSTN so
    that I can put URL like “h323://phone_number@quintum_ip” in
    some h323 client and quintum calls local phone number…

    If someone could send me a configuration parameters of similar quitum setup it
    would be great ๐Ÿ™‚

    Thanks in advance…
    sjosema(at)sezampro(dot)yu

    #26689
    sjosema
    Guest

    >> i have Quintum Tenor

    that is “I have Quintum Tenor A 800” ๐Ÿ™‚

    #26690
    Ivan
    Guest

    send config
    config# print

    #26691
    sjosema
    Guest

    Here it is:
    (I changed first two bytes of ip addresses with “xxx.xxx”)

    Unit
    —-
    Unit: 1
    IP Address = xxx.xxx.235.199
    External IP Address = xxx.xxx.235.199
    Internal Network IP Addr 1: 0.0.0.0
    Internal Network IP Mask 1: 0.0.0.0
    Internal Network IP Addr 2: 0.0.0.0
    Internal Network IP Mask 2: 0.0.0.0
    Internal Network IP Addr 3: 0.0.0.0
    Internal Network IP Mask 3: 0.0.0.0
    Name = unit1

    Online = 1
    Relay ResetTime = 240
    Relay Reset Number = 2

    TcpKeepAlive = Disabled(0)

    System
    ——
    Country Value = 22
    Country Code =
    Area Code =
    Minimum DN = 7
    Maximum DN = 20
    International Prefix:
    Long Distance Prefix =
    Carrier Selection Prefix:
    Intercom Used = no(0)
    Private DN Used = no(0)
    Interdigit Timeout = 8 sec.

    Contact =
    Location =
    IP Address : of Snmp Trap Server 1 = 0.0.0.0
    IP Address : of Snmp Trap Server 2 = 0.0.0.0
    IP Address : of Snmp Trap Server 3 = 0.0.0.0

    IP Address : Port # of Syslog Server 1 = 0.0.0.0 : 514
    IP Address : Port # of Syslog Server 2 = 0.0.0.0 : 514
    IP Address : Port # of Syslog Server 3 = 0.0.0.0 : 514
    Syslog Facility = 16

    IP Address : Port # of Cdr Server 1 = 0.0.0.0 : 0
    IP Address : Port # of Cdr Server 2 = 0.0.0.0 : 0
    Cdr Password:
    Cdr Format: 0

    Ring Frequency = 20 Hz(0)
    PSTN Ring Sensitivity = Normal(0)

    Primary Time Server: IP Address = 0.0.0.0
    Secondary Time Server: IP Address = 0.0.0.0
    UTC Offset: Unknown

    Disc Tone Frequency: 480 Hz (min) : 620 Hz (max)
    Disconnect On/Off Time: 250 mSec(on) : 250 mSec(off)

    Call Indication Tone = None(0)
    Disable GUI = no(0)

    Dialplan
    ——–
    User Programmable DP = No
    Dialplan table:
    index:Pattern DpType min max nprefix

    System LAN
    ———-
    Subnet Mask = 255.255.255.240
    Default Gateway = xxx.xxx.235.193

    PSTN Trunk Group
    —————-
    PSTN Trunk Group: 1
    Name = PstnPassThrough1
    Pass Through = no(0)
    PT Trunk ID = 0
    Provide Call Progress Tone = no(0)
    Busyout = no(0)
    Hunt Algorithm = ascending(0)
    Modem Calls = No(0)
    Direction = both(2)
    DN Used = public
    End Of Dial = yes(1)
    End Of Dial Digit = #
    Add End of Dial Digit = no(0)
    Ivr Type = None
    CID = From Interface(0)
    External Routing Request = no(0)
    Auto Switch Enable = no(0)
    Forced IP Routing # = none
    Trunk ID(Account Code) = none
    Trunk ID Delivery = none
    2 Stage Dial = No
    Translate Inbound Caller ID = no(0)
    Relay Caller ID = yes(1)
    IP Extension = no(0)
    Maximum LAM Calls Allowed = 8
    LAM: Index Pattern Replacement NumberType
    1 < 999> < > 0
    Cas Signaling Type = loop start(1)
    Cas Orientation = user(0)
    Dial Tone Detect = yes(1)
    Dial Delay Timeout = 1000
    Answer Delay Timeout = 0
    Flash-Hook Signaling = no(0)
    Supervision = none(0)
    Caller Id Detection = no(0)
    dtmf-ontime = 100
    dtmf-offtime = 100
    Channel:
    unit# 1 line# 2: 1,2,3,4,5,6,7,8

    PBX Trunk Group
    —————
    PBX Trunk Group: 1
    Name = PbxPassThrough1
    Pass Through = yes(1)
    PT Trunk ID = 0
    Provide Call Progress Tone = yes(1)
    Multipath = yes(1)
    Hunt Algorithm = ascending(0)
    Modem Calls = No(0)
    Direction = both(2)
    DN Used = public
    End Of Dial = yes(1)
    End Of Dial Digit = #
    Add End of Dial Digit = no(0)
    Ivr Type = None
    Partial TG = no(0)
    CID = From Interface(0)
    External Routing Request = no(0)
    Auto Switch Enable = no(0)
    Forced IP Routing # = none
    Trunk ID(Account Code) = none
    Trunk ID Delivery = none
    2 Stage Dial = No
    Translate Inbound Caller ID = no(0)
    Relay Caller ID = yes(1)
    IP Extension = no(0)
    Public Number of Digits = 7
    Private Number of Digits = 4
    Public Hunt Ldn’s:
    Private Hunt Ldn’s:
    BDN: Index Bdn
    Cas Signaling Type = loop start(1)
    Cas Orientation = net(2)
    Flash-Hook Signaling = yes(1)
    Flash-Hook Min = 200
    Flash-Hook Max = 700
    Supervision = none(0)
    Caller Id Generation = no(0)
    dtmf-ontime = 100
    dtmf-offtime = 100
    Channel:
    unit# 1 line# 1: 1,2,3,4,5,6,7,8

    IP Trunk Group
    —————
    Incoming IP call delete digits = 0
    Incoming IP call prefix =
    Outgoing IP call delete digits = 0
    Outgoing IP call prefix =
    Prefix Trunk ID = no(0)
    Default Trunk = No
    External Routing Request = no(0)
    Display Information ID = Tenor-Gateway

    Line
    —-
    Line: 1
    Law = uLaw(0)
    Rx Gain = -4dB
    Tx Gain = -2dB
    Line: 2
    Law = uLaw(0)
    Rx Gain = 0dB
    Tx Gain = 0dB
    Guard Time = 0mS
    DAA Start Up = Enabled

    Bandwidth Management
    ——————–
    Time of Day Maximum Bandwidth:
    Day = 0(Sunday)
    Hour = 00 1536000 1536000 1536000 1536000 1536000 1536000
    Hour = 06 1536000 1536000 1536000 1536000 1536000 1536000
    Hour = 12 1536000 1536000 1536000 1536000 1536000 1536000
    Hour = 18 1536000 1536000 1536000 1536000 1536000 1536000
    Day = 1(Monday)
    Hour = 00 1536000 1536000 1536000 1536000 1536000 1536000
    Hour = 06 1536000 1536000 1536000 384000 384000 384000
    Hour = 12 384000 384000 384000 384000 384000 384000
    Hour = 18 1536000 1536000 1536000 1536000 1536000 1536000
    Day = 2(Tuesday)
    Hour = 00 1536000 1536000 1536000 1536000 1536000 1536000
    Hour = 06 1536000 1536000 1536000 384000 384000 384000
    Hour = 12 384000 384000 384000 384000 384000 384000
    Hour = 18 1536000 1536000 1536000 1536000 1536000 1536000
    Day = 3(Wednesday)
    Hour = 00 1536000 1536000 1536000 1536000 1536000 1536000
    Hour = 06 1536000 1536000 1536000 384000 384000 384000
    Hour = 12 384000 384000 384000 384000 384000 384000
    Hour = 18 1536000 1536000 1536000 1536000 1536000 1536000
    Day = 4(Thursday)
    Hour = 00 1536000 1536000 1536000 1536000 1536000 1536000
    Hour = 06 1536000 1536000 1536000 384000 384000 384000
    Hour = 12 384000 384000 384000 384000 384000 384000
    Hour = 18 1536000 1536000 1536000 1536000 1536000 1536000
    Day = 5(Friday)
    Hour = 00 1536000 1536000 1536000 1536000 1536000 1536000
    Hour = 06 1536000 1536000 1536000 384000 384000 384000
    Hour = 12 384000 384000 384000 384000 384000 384000
    Hour = 18 1536000 1536000 1536000 1536000 1536000 1536000
    Day = 6(Saturday)
    Hour = 00 1536000 1536000 1536000 1536000 1536000 1536000
    Hour = 06 1536000 1536000 1536000 1536000 1536000 1536000
    Hour = 12 1536000 1536000 1536000 1536000 1536000 1536000
    Hour = 18 1536000 1536000 1536000 1536000 1536000 1536000

    Gatekeeper Administration
    ————————-

    Endpoint Authorization Type = 3 (Term+Orig)

    Allowed Endpoints
    IP Mask
    1 xxx.xxx.235.199 255.255.255.0
    2 xxx.xxx.62.252 255.255.255.255

    Barred Endpoints
    IP Mask
    No Barred Endpoints Configured

    Gatekeeper System
    —————–
    Zone Name =
    Border Element IP Address(prim) = 0.0.0.0
    Border Element IP Address(sec) = 0.0.0.0
    Discovery IP Address = 0.0.0.0
    Gatekeeper Password =
    LRQ returns all candidates(0)
    Maximum LRQ Hops = 0
    WAN Call Limit = 0 (disabled)
    LCF/LRJ V3plus = 1
    Gatekeeper Option Flags:
    Use IP Header Address = no(0)
    Ridgeway ARQ = no(0)

    Border Element
    —————–
    Static Routing
    No Static Routes configured

    DSP

    Voice Coding algorithm = 81
    Voice Information Field size = 192 bits
    Silence Suppression = Enable(1)
    Minimum Jitter buffer = 60 msec
    Maximum Jitter buffer = 300 msec
    Receive Gain (PCM -> IP) = -2 dB
    Transmit Gain (IP -> PCM) = -4 dB
    Digit Relay = 0
    Fax Relay Type = 0
    Fax Maximum Rate = 144
    Fax Playout FIFO nominal delay = 600
    Fax Modem Coding = 0
    Idle Time = 0
    Answer Supervision Options = 0

    AutoSwitch
    ———-
    Auto Threshold = 50

    H323 Gateway
    —————–
    Primary GK Address = 0.0.0.0
    Primary Auto Discovery = 0
    Secondary GK Address = 0.0.0.0
    Secondary Auto Discovery = 0
    H.323 ID =
    Register DN = Register as GW Prefixes(1)
    Ignore Bandwidth in ACF = no(0)
    Default H245 Tunneling = yes(1)
    Round Trip Delay = 0
    One Stage Dialing = 0
    RRQ Interval = 0
    H323 Interop Flags:
    H225 GW Protocol = h323(0)
    Do BRQ = 0
    SlaveSessionId0 = 0
    AllowFastStartOnly = No(0)
    RRQv3plus= No(0)
    ProgressInd Alert= No(0)
    StartH245Flag= No(0)
    Automatic Ext IP Update= No(0)
    RTP Verification= No(0)

    Do Lightweight RRQ = no(0)

    Radius User
    ———–

    host p 0.0.0.0
    authenticationport p 1812
    accountingport p 1813

    host s 0.0.0.0
    authenticationport s 1812
    accountingport s 1813

    retry = 3
    timeout = 5
    accountingtype = 0
    billingvendor 0
    sharedsecret

    IVR
    ——

    Primary File Server: IP Address = 0.0.0.0
    Secondary File Server: IP Address = 0.0.0.0
    timeout: 0

    Enabled Languages: None

    CID Translation Table
    ——
    Caller ID Translation Table
    Index Pattern Replacement

    Radius Endpoint
    —————

    host p 0.0.0.0
    authenticationport p 1812
    accountingport p 1813

    host s 0.0.0.0
    authenticationport s 1812
    accountingport s 1813

    retry = 3
    timeout = 5
    idtype = 0
    passwordtype = 0
    sharedsecret

    Product Name: Tenor Analog A800 Multipath Switch – 8 ports (Rev. B)
    Gatekeeper Status: Mini
    GK Calls Allowed: 8
    Feature Bit Status: -PS/+RB/-ER
    Languages allowed: 1
    Serial Number: A002-00281E
    Ethernet Address: 00-30-E1-00-28-1E
    IP Address: xxx.xxx.235.199
    Subnet Mask: 255.255.255.240
    Default Gateway: xxx.xxx.235.193
    System Software Version: P4-2-20-28(LEC) (1720084/0x6856)
    Boot Software Version: P4-1-3 (180592/0xE814)
    Database Version: 2.08 09-13-2000 (277900)

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.