Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Quintum D-3000 setup for orig/ter

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #26680
    Zarko
    Guest

    I will be very happy if somebody can help me to solve next problem:

    I have one unit of D-3000 which I use at the moment for termination. everything works fine in this segment.

    Now I want to use same unit of origination too, but to continue with termination with same unit.

    I configured D-3000 to answer the call with PIN authorization directly on the unit. Gateway answers the call, ask for PIN, PIN is entered, then dial tone is provided. After dialing number call is getting disconnected with fast busy signal.

    IP of gateway where traffic have to be sent is 195.35.19.234 Gateway is working fine, when I place call with ATA box everything works fine. Tech prefix which have to be used for placing calls is 9992.

    Here is copy of my config file:

    Unit
    —-
    Unit: 1
    IP Address = 195.29.91.203
    External IP Address = 0.0.0.0
    Name = VOIP
    Clock Source = PSTN(0)

    Online = 1
    Relay ResetTime = 240
    Relay Reset Number = 2

    TcpKeepAlive = Disabled(0)

    System
    ——
    Country Value = 1
    Country Code =
    Area Code =
    Minimum DN = 7
    Maximum DN = 20
    International Prefix:
    Long Distance Prefix =
    Carrier Selection Prefix:
    Intercom Used = no(0)
    Private DN Used = no(0)
    Interdigit Timeout = 8 sec.

    Contact =
    Location =
    IP Address : of Snmp Trap Server 1 = 0.0.0.0
    IP Address : of Snmp Trap Server 2 = 0.0.0.0
    IP Address : of Snmp Trap Server 3 = 0.0.0.0

    IP Address : Port # of Syslog Server 1 = 0.0.0.0 : 514
    IP Address : Port # of Syslog Server 2 = 0.0.0.0 : 514
    IP Address : Port # of Syslog Server 3 = 0.0.0.0 : 514
    Syslog Facility = 16

    IP Address : Port # of Cdr Server 1 = 195.29.91.200 : 9002
    IP Address : Port # of Cdr Server 2 = 0.0.0.0 : 0
    Cdr Password: 362302
    Cdr Format: 0

    Primary Time Server: IP Address = 0.0.0.0
    Secondary Time Server: IP Address = 0.0.0.0
    UTC Offset: Unknown

    Disc Tone Frequency: 480 Hz (min) : 620 Hz (max)
    Disconnect On/Off Time: 250 mSec(on) : 250 mSec(off)

    Call Indication Tone = None(0)

    Dialplan
    ——–
    User Programmable DP = No
    Dialplan table:
    index:Pattern DpType min max nprefix

    System LAN
    ———-
    Subnet Mask = 255.255.255.224
    Default Gateway = 195.29.91.193

    PSTN Trunk Group
    —————-
    PSTN Trunk Group: 1
    Name = PstnPassThrough1
    Pass Through = no(0)
    PT Trunk ID = 0
    Provide Call Progress Tone = no(0)
    Busyout = no(0)
    Hunt Algorithm = descending(1)
    Overlap Dial = no(0)
    Modem Calls = No(0)
    Direction = both(2)
    DN Used = public
    End Of Dial = no(0)
    Ivr Type = 2nd Dial Tone
    Pin Code = 1234
    CID = From Interface(0)
    External Routing Request = no(0)
    Auto Switch Enable = no(0)
    Forced IP Routing # = none
    Trunk ID(Account Code) = none
    Trunk ID Delivery = none
    2 Stage Dial = No
    Translate Inbound Caller ID = no(0)
    Relay Caller ID = no(0)
    IP Extension = no(0)
    Maximum LAM Calls Allowed = 30
    LAM: Index Pattern Replacement NumberType TON NPI
    1 < 38551> < > 0 0 0
    2 < 385> < 0> 0 0 0
    3 < 3856> < 9999> 0 0 0
    4 < 3857> < 9999> 0 0 0
    5 < 3858> < 9999> 0 0 0
    6 < 38598> < 9999> 0 0 0
    7 < 3850> < 9999> 0 0 0
    8 < 38510> < 9999> 0 0 0
    9 < 385510> < 99999> 0 0 0
    10 < 38599> < 9999> 0 0 0
    CCS Or CAS = ccs(0)
    Channel:
    unit# 1 line# 2: 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31

    PBX Trunk Group
    —————
    PBX Trunk Group: 1
    Name = PbxPassThrough1
    Pass Through = yes(1)
    PT Trunk ID = 0
    Provide Call Progress Tone = no(0)
    Multipath = yes(1)
    Hunt Algorithm = ascending(0)
    Overlap Dial = no(0)
    Modem Calls = No(0)
    Direction = both(2)
    DN Used = public
    End Of Dial = yes(1)
    End Of Dial Digit = #
    Add End of Dial Digit = no(0)
    Ivr Type = None
    Partial TG = no(0)
    CID = From Interface(0)
    External Routing Request = no(0)
    Auto Switch Enable = no(0)
    Forced IP Routing # = none
    Trunk ID(Account Code) = none
    Trunk ID Delivery = none
    2 Stage Dial = No
    Translate Inbound Caller ID = no(0)
    Relay Caller ID = no(0)
    IP Extension = no(0)
    Public Number of Digits = 7
    Private Number of Digits = 4
    Public TON = 1
    Public NPI = 0
    Private TON = 0
    Private NPI = 9
    Public Hunt Ldn’s:
    Private Hunt Ldn’s:
    BDN: Index Bdn
    CCS Or CAS = ccs(0)
    Channel:
    unit# 1 line# 1: 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31

    IP Trunk Group
    —————
    Incoming IP call delete digits = 0
    Incoming IP call prefix =
    Outgoing IP call delete digits = 2
    Outgoing IP call prefix = 9992
    Prefix Trunk ID = no(0)
    Default Trunk = No
    External Routing Request = no(0)
    Display Information ID = Tenor-Gateway

    Line
    —-
    Line: 1
    Law = ALaw(1)
    T1 or E1 = E1(1)
    Line Code = HDB3(2)
    CRC = yes(1)
    E1 Framing Format = SF(0)
    E1 Impedance = 120ohm(1)
    Line: 2
    Law = ALaw(1)
    T1 or E1 = E1(1)
    Line Code = HDB3(2)
    CRC = yes(1)
    E1 Framing Format = SF(0)
    E1 Impedance = 120ohm(1)

    Signaling
    ———
    Signaling Group: 1
    Name = CCS00
    ISDN Protocol Type = ETSI(5)
    Orientation = net/master(1)
    DCh Num = 16
    Ignore TON/NPI = yes
    FAS unit = 1
    FAS line = 1
    link establishment = always(1)
    Relay PROG = yes(1)
    Force Outbound BCAP = No(0)
    Forced ProgInd IE Outbound = Disabled
    Signaling Group: 2
    Name = CCS00
    ISDN Protocol Type = ETSI(5)
    Orientation = user/slave(0)
    DCh Num = 16
    Ignore TON/NPI = yes
    FAS unit = 1
    FAS line = 2
    link establishment = always(1)
    Relay PROG = yes(1)
    Force Outbound BCAP = No(0)
    Forced ProgInd IE Outbound = Disabled

    Bandwidth Management
    ——————–
    Time of Day Maximum Bandwidth:
    Day = 0(Sunday)
    Hour = 00 * * * * * *
    Hour = 06 * * * * * *
    Hour = 12 * * * * * *
    Hour = 18 * * * * * *
    Day = 1(Monday)
    Hour = 00 * * * * * *
    Hour = 06 * * * * * *
    Hour = 12 * * * * * *
    Hour = 18 * * * * * *
    Day = 2(Tuesday)
    Hour = 00 * * * * * *
    Hour = 06 * * * * * *
    Hour = 12 * * * * * *
    Hour = 18 * * * * * *
    Day = 3(Wednesday)
    Hour = 00 * * * * * *
    Hour = 06 * * * * * *
    Hour = 12 * * * * * *
    Hour = 18 * * * * * *
    Day = 4(Thursday)
    Hour = 00 * * * * * *
    Hour = 06 * * * * * *
    Hour = 12 * * * * * *
    Hour = 18 * * * * * *
    Day = 5(Friday)
    Hour = 00 * * * * * *
    Hour = 06 * * * * * *
    Hour = 12 * * * * * *
    Hour = 18 * * * * * *
    Day = 6(Saturday)
    Hour = 00 * * * * * *
    Hour = 06 * * * * * *
    Hour = 12 * * * * * *
    Hour = 18 * * * * * *

    Gatekeeper Administration
    ————————-

    Endpoint Authorization Type = 0 (None)

    Allowed Endpoints
    IP Mask
    1 195.29.91.205 255.255.255.255
    2 195.29.91.203 255.255.255.255
    3 195.35.19.227 255.255.255.255
    4 212.162.3.2 255.255.255.255
    5 195.35.19.234 255.255.255.255

    Barred Endpoints
    IP Mask
    No Barred Endpoints Configured

    Gatekeeper System
    —————–
    Zone Name = HR
    Border Element IP Address(prim) = 195.29.91.203
    Border Element IP Address(sec) = 0.0.0.0
    Discovery IP Address = 0.0.0.0
    Gatekeeper Password =
    LRQ returns all candidates(0)
    Maximum LRQ Hops = 0
    WAN Call Limit = 0 (disabled)
    LCF/LRJ V3plus = 1
    Gatekeeper Option Flags:
    Use IP Header Address = no(0)
    Ridgeway ARQ = no(0)

    Border Element
    —————–
    Static Routing
    Static Route #1
    RouteName = primus
    Gkmode = Destination is a Gateway (0)
    CallSignalAddress = 195.35.19.234:1720
    1:00* Public LDN priority(2)

    DSP

    Voice Coding algorithm = 68
    Voice Information Field size = 320 bits
    Silence Suppression = Enable(1)
    Minimum Jitter buffer = 80 msec
    Maximum Jitter buffer = 480 msec
    Receive Gain (PCM -> IP) = -2 dB
    Transmit Gain (IP -> PCM) = -4 dB
    Digit Relay = 0
    Fax Relay Type = 1
    T.38 Fax Low Speed Data Redundancy = 2
    T.38 Fax High Speed Data Redundancy = 1
    Fax Maximum Rate = 144
    Fax Playout FIFO nominal delay = 600
    Fax Modem Coding = 0
    Idle Time = 40
    Answer Supervision Options = 0

    AutoSwitch
    ———-
    Auto Threshold = 50

    H323 Gateway
    —————–
    Primary GK Address = 0.0.0.0
    Primary Auto Discovery = 0
    Secondary GK Address = 0.0.0.0
    Secondary Auto Discovery = 0
    H.323 ID =
    Register DN = Register as GW Prefixes(1)
    Ignore Bandwidth in ACF = no(0)
    Default H245 Tunneling = yes(1)
    Round Trip Delay = 0
    One Stage Dialing = 0
    RRQ Interval = 0
    H323 Interop Flags:
    H225 GW Protocol = h323(0)
    Do BRQ = 0
    SlaveSessionId0 = 0
    AllowFastStartOnly = No(0)
    RRQv3plus= No(0)
    ProgressInd Alert= No(0)
    StartH245Flag= No(0)
    Automatic Ext IP Update= No(0)
    RTP Verification= No(0)

    Do Lightweight RRQ = no(0)

    Radius User
    ———–

    host p 195.29.91.200
    authenticationport p 1812
    accountingport p 1813

    host s 195.29.91.199
    authenticationport s 1812
    accountingport s 1813

    retry = 5
    timeout = 10
    accountingtype = 2
    billingvendor 0
    sharedsecret ******

    IVR
    ——

    Primary File Server: IP Address = 0.0.0.0
    Secondary File Server: IP Address = 0.0.0.0
    timeout: 5

    Enabled Languages: None

    CID Translation Table
    ——
    Caller ID Translation Table
    Index Pattern Replacement

    Radius Endpoint
    —————

    host p 0.0.0.0
    authenticationport p 1812
    accountingport p 1813

    host s 0.0.0.0
    authenticationport s 1812
    accountingport s 1813

    retry = 3
    timeout = 5
    idtype = 0
    passwordtype = 0
    sharedsecret

    Product Name: Tenor Digital Multipath Switch – 30 ports (Rev. B)
    Gatekeeper Status: Mini
    GK Calls Allowed: 30
    Feature Bit Status: -PS/+RB/-ER
    Languages allowed: 1
    Serial Number: A001-000FB1
    Ethernet Address: 00-30-E1-00-0F-B1
    IP Address: 195.29.81.203
    Subnet Mask: 255.255.255.224
    Default Gateway: 195.29.81.193
    System Software Version: P4-2-20-29 (1664242/0x8E96)
    Boot Software Version: P4-1-15 (186964/0xC8BE)
    Database Version: 2.08 09-13-2000 (277900)

    #26681
    Beny
    Guest

    1. Never don’t put on public Internet full configuration (with IP, prefixes…)
    2. Change “co be sr 1” instead “00*” enter “9992*” and all will work

    #26682
    Zarko
    Guest

    Beny,

    I changed IP’s in config file before posting, so this is not real ones 🙂

    Second thing, gw is programmed to attach 9992 prefix to any dialed number going out in co ip outprefix 9992

    I want to dial number without tech prefix (gw have to add it) and using international code 00 for prefix. Because of this in co be sr 1 is value 00.

    Our gateway then have to strip 00, and to add prefix 9992 to dialed number and to send to correct destination.

    Thanks,

    Zarko

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.