Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

what is trunk and lines?

  • This topic has 3 replies, 1 voice, and was last updated 20 years ago by PB.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #26611
    gigi
    Guest

    Hi,
    I can’t understand the difference between trunk and line. Is right to suppose # of lines = # of calls? and if I have a different codec (e.g. 22 kb/s and not 64 kb/s) the number of trunk will change?

    #26612
    Hieuht
    Guest

    You can consider line as the link between your phone and CO and trunk as the link between COs.

    #26613
    Beny
    Guest

    Your question is about PBX! It has some trunks and some extensions (ex. : 4/16 or 8/120..)
    The line is PSTN connection to this PBX. Is’s must be connected to Trunk. If we talk about analog lines – for 4 trunks possible connect only 4 PSTN lines.
    In case digital – 1 T1 connection(trunk in PBX) is connect 24 PSTN lines.
    For the VoIP GWs are same way – numbers of line = max # concurrent calls.
    Use different codec will give you more or less used bandwidth… for the same number of calls…

    #26614
    PB
    Guest

    Trunks are commonly used by PBX switches to communicate with each other. Among the many types of trunks, the most widely used types are Central Office (CO) trunks, which provide connection to the public network through a Central Office and tie trunks which provide connections between switches in a private network.

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.