- This topic has 19 replies, 1 voice, and was last updated 11 years, 10 months ago by John to George.
22nd January 2004 at 06:53 #26212Gulzar HussainGuest
I m using Qunitum Tenor as a Gateway, GnuGK as Gatekeeper and Microsoft Netmeeting as H323 client
in addition i dedicate a computer to work as Answering Machince and Install OpenAM on it
when no agent is available to attend the call that comes in to Tenor then the call routed to OpenAM but instead of playing OGM and recording call use to disconnect in a second
cant understand whats the problem cause Netmeeting is working fine and agents are attending calls normally
thanx in advance22nd January 2004 at 19:24 #26213voiphelp.netGuest23rd January 2004 at 06:22 #26214Gulzar HussainGuest
I have set G723.1 on Tenor and set the sample_message_g7231.wav as OGM, what else i have to do ?23rd January 2004 at 14:21 #26215www.voiphelp.netGuest
I’ll have to see the configuration in your Quintum.
firstname.lastname@example.org January 2004 at 18:17 #26216DevaGuest
You really have to be careful with netmeeting since it only supports in-band DTMF which means if you need to drive IVR or anything via the netmeeting keypad, you won’t be very happy. If you can get a client with out-of-band DTMF it will be much more reliable.26th January 2004 at 06:11 #26217Gulzar HussainGuest
Thanx a lot for all of your replies that was a Codec problem and its solved now .
But now i am having a new problem, I have added the ACD application in my senario so when OpemAM starts playing OGM meanwhile if an agent become available call must be tranfered to that agent but its not happening
I am sure problem is at Tenor’s side
any clue ?26th January 2004 at 23:52 #26218voiphelp.netGuest
Once openAM starts playing the file, as far as the quintum is concerned the call is in progress and it is not going to transfer the call back to the open line. However the next incoming call will go to the open line. Provided it is configured correctly of course.
email@example.com January 2004 at 05:31 #26219Gulzar HussainGuest
GNUGK is sending the message to Tenor to forward (callForward Facility Message) the call then why call is not forwarding to the available agent
Does Tenor supports Facility messages ?28th January 2004 at 00:16 #26220www.voiphelp.netGuest
The Quintum doesn’t support any of the H.450.1 supplemental services. I believe the one you would be looking for in this situation would be H.450.2 Call Transfer.
firstname.lastname@example.org January 2004 at 10:51 #26221Gulzar HussainGuest
which gateways support H.450.2 Call Transfer ?
Does Huawei Quidway A8010 Mini Expert support it ?31st January 2004 at 09:21 #26222Gulzar HussainGuest
Waiting for the answer from somebody
Does Huawei Quidway A8010 Mini Expert support H.450.2 Call Transfer ?3rd February 2004 at 04:12 #26223voiphelp.netGuest
Sorry for the delay, you may want to confirm that this is the supplementary service that gnugk is trying to use. The H.323 Mediatrix products support both H.450.2 Call transfer and H.450.3 call diversion.
email@example.com February 2004 at 07:05 #26224Gulzar HussainGuest
I wanna know about Huawei Quidway A8010 Mini Expert30th March 2004 at 18:09 #26225CharlesGuest
Looking for a configuration to use with my Mediatrix APA III-4FXS running H.323 on a calling card plateform.
The calling card plateform uses a quitum A800; dial an access number, PIN then destination number.
There IP connectivity between the Mediatrix and the quintum.31st March 2004 at 16:04 #26226www.blue-lava.co.ukGuest
The Welltech gateways support H.450 services including call transfer. They also support dynamic CODEC negotiation so all those horrible CODEC mismatch issues are a thing of the past.
To make things even better they are H.323 and SIP compliant and under half the price of a Quintum equivalent.
Hope this helps