Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Hard reset ws100

Viewing 13 posts - 16 through 28 (of 28 total)
  • Author
    Posts
  • #25965
    outlooker
    Guest

    Solphone System Boot

    Copyright 1984-1998 Wind River Systems, Inc.

    CPU: Solphone3004 – MPC850
    VxWorks Version: 5.4
    BSP version: S1.3/Build 08
    Creation date: Nov 6 2000, 18:14:08

    Press any key to stop auto-boot…
    7

    BOOT> help

    ? – print this list
    @ – boot (load and go)
    p – print boot params
    c – change boot params
    l – load boot file
    g adrs – go to adrs
    d adrs[,n] – display memory
    m adrs – modify memory
    f adrs, nbytes, value – fill memory
    t adrs, adrs, nbytes – copy memory
    e – print fatal exception
    b – set auto-start level to 0, 1, or 3
    C – Clean Golden Gateway Configuration
    T – set the DSP type for GG
    v – view Telogy’s boot record
    G – set default gateway
    n netif – print network interface device address
    N – set ethernet (MAC) address
    $dev(0,procnum)host:/file h=# e=# b=# g=# u=usr [pw=passwd] f=#
    tn=targetname s=script o=other
    Boot flags:
    0x02 – load local system symbols
    0x04 – don’t autoboot
    0x08 – quick autoboot (no countdown)
    0x20 – disable login security
    0x40 – use dhcp to get boot parameters
    0x80 – use tftp to get boot image
    0x100 – use proxy arp

    available boot devices:Enhanced Network Devices
    cpm cpm

    #25966
    outlooker
    Guest

    Diagnostics v1.04
    Main Software Release: S1.2/Build 10
    #
    Power Supply Status:
    DSP core . . . . . . . . : Ok
    Ring/Feed . . . . . . . . : Ok

    Testing DRAM @ 0x00000000..0x007fffff
    Data lines (w1) . . . . . : Ok
    Data lines (m1) . . . . . : Ok
    Address lines . . . . . . : Ok
    Bit integrity . . . . . . : Ok
    PASSED

    Ethernet Link Status . . . . : Link Ok

    Parallel Ports Status

    PA: 0 4 8 12
    par —- ooii pp– iioi
    dat 1000 00 0110

    PB: 16 20 24 28
    par iiio –oi oooo iooo
    dat 1110 11 0001 0111

    PC: 0 4 8 12
    par —- ooii iiii oooi
    dat 1100 0001 1100

    PD: 0 4 8 12
    par —o iiii oooo oooo
    dat 1 0001 0011 1101

    Testing DSP HPI @ 0x03000000
    HPI data bus test . . . . : Ok
    HPI DSP write test . . . : Ok
    HPI DSP auto inc writes . : Ok
    HPI DSP GG diagnostic . . : Ok
    HPIC = 0x0000

    Ethernet test . . . . . . . : Ok

    QSLAC Test:
    Initialise . . . . . . . : Ok
    Read Config Reg . . . . . : Ok
    Write Debnce Time Reg Cmd : Ok
    Hardware Reset Cmd . . . : Ok
    Revision Code = 0x13

    Main Board Revision . . . . : 1
    Option Board Id . . . . . . : 7

    Board Configuration Information
    ===============================
    Boot Line: . . . . . . . . . : “cpm(0,0)dfi-815:updater.ftp e=192.168.1.4”
    MAC Address . . . . . . . . : 00-60-c4-f0-04-0b
    Auto Boot Flag . . . . . . . : 2 -> start everything
    IP Address . . . . . . . . . : 192.168.1.4
    Default Gateway IP Address . : 0.0.0.0
    Default Netmask . . . . . . : 255.255.255.0

    Debug Monitor
    (type “?” for help)

    >
    > ?
    Available commands:
    1. dsp DSP HPI test
    2. eet Eerom test
    3. eer Eerom read
    4. eew Eerom write
    eg.
    eew 1a=124f Write 0x124f to EE addr 0x1a
    5. erase Eerom erase
    6. eth Ethernet test
    7. hpi Diagnose DSP HPI
    8. info Show configuration info
    9. m[b,w,l]
    m[b,w,l] =
    Memory dump diagnostic.
    Where addr, length & data are in hex.
    eg.
    m 200 10 Read 0x10 bytes at address 0x200
    mw 200 10 Read 0x10 words at address 0x200
    ml 200 10 Read 0x10 longs at address 0x200
    ml 200=10 Set 0x200 to 0x00000010
    10. p[a,b,c,d]
    p[a,b,c,d]=
    Parallel i/o port diagnostic.
    eg.
    pa Display Port A data latch
    pa=0b00 Write 0x0b00 to Port A data latch
    11. qi Initialise QSLAC
    qs Read QSLAC status word
    qw XX XX XX …, y Write hex bytes 0xXX to the QSLAC
    and then receive decimal y bytes
    12. rf on Enable the ring/feed power supply
    rf off Disable the ring/feed power supply
    rf x Enable the ring/feed supply for x * 100ms
    Where x = 1..99
    13. ring 15[20,25,50] Set the ringer frequency (Hz).
    14. . Repeat last command.
    15. , Recall last command.

    #25967
    outlooker
    Guest

    So far ,I found two way to boot ws100 fxs from TTL port
    1.Diagnostics mode

    before ws100 is reseted.change RxD on TTL side with Ground.when you get a stable Dark Green window.change the Rxd back.So you can input any command.

    2.Normal boot mode.

    You can change boot parameter by command ‘c’.
    soft reset by ‘g 10000′.

    however,I can not find any command like NIOP ,PFLASH end etc. to update firmware.’c’ command does not work with TFTP even though I had tried every combination.so far I can not boot my box by staying on LED 3.

    I really appreciated if there is any one who can tell me how to enter NIOP mode!

    film_montreal@hotmail.com

    #25968
    outlooker
    Guest

    After changing to ftp. it could forward one step.but I still did not how to load boot.ld and ip_fxs.ld
    Solphone System Boot

    Copyright 1984-1998 Wind River Systems, Inc.

    CPU: Solphone3004 – MPC850
    VxWorks Version: 5.4
    BSP version: S1.3/Build 08
    Creation date: Nov 6 2000, 18:14:08

    Press any key to stop auto-boot…
    0
    auto-booting…

    boot device : cpm
    unit number : 0
    processor number : 0
    host name : 440lx
    file name : updater_3r4.ftp
    inet on ethernet (e) : 192.168.1.4
    inet on backplane (b): 255.255.255.0
    host inet (h) : 192.168.1.102
    gateway inet (g) : 192.168.1.1
    user (u) : administrator
    ftp password (pw) : password
    flags (f) : 0x80
    target name (tn) : updater.ftp
    startup script (s) : boot_3r4.ld
    other (o) : ip_fxs_3r4.ld

    Attached TCP/IP interface to cpm0.
    Attaching network interface lo0… done.
    Loading…
    Recognized TNI file format…
    *********************************************************
    Telogy Networks file format OK. Checking the file header…
    File header information:
    ———————————–
    Code length: 0x000CAE29
    Offset: 0x00000024
    Destination Address: 0x00010000
    Executable Address: 0x00010000
    Header check Sum: 0x000EAE4D
    Code check Sum: 0x037BFB27
    Next header offset: 0x00000000
    Options: 0x00000002
    ———————————–
    Header checksum is OK…
    Loading… estimating load time…
    ETA: 0 seconds
    Done loading.
    Starting at 0x10000…

    Attached TCP/IP interface to cpm unit 0
    Attaching network interface lo0… done.
    [1] dhcpcLibInit() has been done successfully.
    dhcpcConfigSet() has been done successfully.
    NFS client support not included.
    usrResolvInit() has been done successfully.
    Error initializing resolvLib

    Adding 2847 symbols for standalone.

    ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
    ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
    ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
    ]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
    ] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
    ]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
    ]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
    ]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
    ]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
    ]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
    ]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
    ]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
    ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
    ]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
    ]]]]]]]]]]]]]]]]]]]]]]]]]]]]
    ]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.4
    ]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.5
    ]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-1999

    CPU: MPC850 – Solphone300x. Processor #0.
    Memory Size: 0x800000. BSP version S1.4/Build 01.

    ->

    #25969
    outlooker
    Guest

    Finnaly.I open anothernew box and found its boot paratemer is as below:

    boot device : flashcpm0
    processor number : 0
    host name : SOLPHONE
    file name : updater.ftp
    inet on ethernet (e) : 192.168.10.2:ffffff00
    inet on backplane (b):
    host inet (h) :
    gateway inet (g) :
    user (u) :
    ftp password (pw) (blank = use rsh):
    flags (f) : 0x8
    target name (tn) :
    startup script (s) :
    other (o) :

    I just copy this exactly,and the bad box can boot up. but there still something to be dealed with.

    Solphone System Boot

    Copyright 1984-1998 Wind River Systems, Inc.

    CPU: Solphone3004 – MPC850
    VxWorks Version: 5.4
    BSP version: S1.3/Build 08
    Creation date: Nov 6 2000, 18:14:08

    Press any key to stop auto-boot…
    0
    auto-booting…

    boot device : flashcpm
    unit number : 0
    processor number : 0
    host name : SOLPHONE
    file name : updater.ftp
    inet on ethernet (e) : 192.168.1.4:ffffff00
    flags (f) : 0x8

    Accessing FLASH…
    Recognized Telogy’s file format:
    ———————————–
    Code length: 0x0012A601
    Offset: 0x00000024
    Destination Address: 0x00010000
    Executable Address: 0x00010000
    Header check Sum: 0x0014A625
    Code check Sum: 0x09D08F96
    Next header offset: 0x00000000
    Options: 0x00000001
    ———————————–
    Calculating header checksum…OK
    Verifying image checksum in FLASH…OK
    Compressed image. Decompressing…OK
    Starting at 0x10000…

    Target Name: vxTarget
    User: target
    Attached TCP/IP interface to cpm unit 0
    Attaching network interface lo0… done.
    [1] dhcpcLibInit() has been done successfully.
    dhcpcConfigSet() has been done successfully.
    NFS client support not included.

    Adding 6671 symbols for standalone.

    ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
    ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
    ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
    ]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
    ] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
    ]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
    ]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
    ]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
    ]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
    ]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
    ]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
    ]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
    ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
    ]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
    ]]]]]]]]]]]]]]]]]]]]]]]]]]]]
    ]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.4
    ]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.5
    ]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-1999

    CPU: Solphone3004 – MPC850. Processor #0.
    Memory Size: 0x800000. BSP version S1.3/Build 08.

    MXP environment is created.
    -> Creating Golden Gateway application…
    0000000241 – NMM: ATPM Update Database Granted
    0000000341 – NMM: ATPM Configured From Flash
    0000000342 – NMM: ATPM Update database done
    0000000346 – TSG: 0, Coding Profile 0 is undefined
    0000000346 – NMM: 0, Port Not Configured
    0000000346 – TSG: 1, Coding Profile 0 is undefined
    0000000346 – NMM: 1, Port Not Configured
    0000000347 – TSG: 2, Coding Profile 0 is undefined
    0000000347 – NMM: 2, Port Not Configured
    0000000347 – TSG: 3, Coding Profile 0 is undefined
    0000000347 – NMM: 3, Port Not Configured
    0000000349 – HSMU: Created.
    0000000374 – Registering terminal alias h323_ID “Solphone Preferred Customer”.
    0000000727 – Reporting configured audio profiles:

    #25970
    outlooker
    Guest

    At last,You can set everything by Netmanage,after reboot you can hear sound through phone set.

    #25971
    outlooker
    Guest

    I am still wondering how to update firmware,I take a wide guess that maybe there should be a boot script to load the file “boot_3r4.ld” and “ip_fxs_3r4.ld”. as I had never succed in loading any of them manually.
    there is a url maybe helpful:
    http://www.xs4all.nl/~borkhuis/vxworks/basicNetConfiguration.txt

    when you search on google by key words GW3004, you will find that there have been SIP firmware for GW3000 series already.but they all in Japanese.

    #25972
    kasper
    Guest

    If you would like a copy of the Webswitch 100 flasher, let me know. I can E-mail out to you.
    But I am still looking for the correct pin-out fo rthe din serial port. Any info on this?

    #25973
    Outlooker
    Guest

    the Pin map is just like Fractal said. you could show this using digital meter.but please use the RS232 to TTL coverter which I used a electrical dictionary’s cable,
    Txd,Rxd,Gnd,9600-N-1.I would like to get a flasher and any version firmware.

    my E-mail: film_montreal@hotmail.com

    Thanks in advance!

    #25974
    Outlooker
    Guest

    And I had figured out the step to update the firmware from version 2r1

    http://www.erlang.com/forum/voip/thread.htx?thread=2769

    I hope this could help.

    #25975
    kaspercat
    Guest

    for those who can’t get the device booting, you might want to try these options: (use your own IP address)
    boot device : cpm0
    processor number : 0
    host name : SOLPHONE
    file name : flash
    inet on ethernet (e) : 192.168.0.122:0xffffff00
    inet on backplane (b):
    host inet (h) :
    gateway inet (g) :
    user (u) :
    ftp password (pw) (blank = use rsh):
    flags (f) : 0x8
    target name (tn) : EWC192168000122
    startup script (s) :
    other (o)

    #25976
    david Lear
    Guest

    Sonny – I only just read your forum article, there is Japanese company details if you need it also i recall once having a problem with P4 – I thought it dead for 9 months BUT just like a pregnancy – life came when I realised that it had actually defaulted to DHCP mode which was NOT what I was expecting as usually it goes to 192.168.10.2 and lo, I was able to use it again – I stopped experimenting after that !! mind you anybody know how to RESET a ws2000 please ? and yes I have Websuite available for the asking

    #25977
    Mir Khan
    Guest

    I am looking for Default Firmware of Teliann IP Phone

    VxWorks default Firmware for H.323 & SIP

Viewing 13 posts - 16 through 28 (of 28 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.