[Linman]

I am unable to use PBX ports on the A400. I have activated those ports through the web interface.

Advise me.

[Noname]

Quintum itself advices against using the web browser.

It should work ,however. If you send me a copy and paste of PBXTNTG
from the CLI command, I will go over it and tell you if I see something wrong.

go to the CLI, either via telnet or direct conection to the RS@232 port.

Type config

at the config# prompt, type “print”

capture the file, erase or mask out the I.P. addresses or any other confidential info and send it to me

mike3799@yahoo.com.

I will take a look and tell you if I see the mistake.

Cheers!!!!!!

[Author]

Posts