Generic selectors
Exact matches only
Search in title
Search in content

Tenor Gatekeeper

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #25713 Reply

    I need quintum tenor gatekeeper’s (stand alone gatekeeper)command line interface guide. If anyone can help me i’ll be so pleased..

    #25714 Reply

    The Quintum GateKeeper uses a subset of the standard CLI. Most of the standard commands (as used on the A400/800, D3000 etc.) will work on the stand alone GateKeeper.

    Are you using the GateKeeper to control Quintum Gateways or other vendors devices?

    #25715 Reply

    If that will work, I could send you the standar CLI command manual.

    It is about 250 pages worth of commands.

    Write to and I shall reply with a copy of the manual.

    #25716 Reply

    Hi blue-lava.. First thanks for your interest and help..I will use gatekeeper to control Quintum A800 Analog gateway.. Maybe FreeLine and cisco Ata series canbe but most Quintum..

Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: Reply #25716 in Tenor Gatekeeper
Your information:

<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">