Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Tenor Gatekeeper

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #25713
    VoIP
    Guest

    Hi
    I need quintum tenor gatekeeper’s (stand alone gatekeeper)command line interface guide. If anyone can help me i’ll be so pleased..

    #25714
    www.blue-lava.co.uk
    Guest

    The Quintum GateKeeper uses a subset of the standard CLI. Most of the standard commands (as used on the A400/800, D3000 etc.) will work on the stand alone GateKeeper.

    Are you using the GateKeeper to control Quintum Gateways or other vendors devices?

    #25715
    Noname
    Guest

    If that will work, I could send you the standar CLI command manual.

    It is about 250 pages worth of commands.

    Write to mike3799@yahoo.com and I shall reply with a copy of the manual.

    #25716
    Voip
    Guest

    Hi blue-lava.. First thanks for your interest and help..I will use gatekeeper to control Quintum A800 Analog gateway.. Maybe FreeLine and cisco Ata series canbe but most Quintum..

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.