Generic selectors
Exact matches only
Search in title
Search in content

quintum with netmeeting

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
  • #25618 Reply

    can someone let me know how i can use netmeeting to place a call by Gateway setting (not by gatekeeper)with quintum tenor a800.

    #25619 Reply
    john tuttle


    set config–>h323gw–>defaulth245tunneling=no(0)

    set config–>dsp–>faxrelay=0

    setup netmeeting to point to Tenor GW


    #25620 Reply
    Tasdiq Ahmed

    Thanks John. It’s working.
    Is it possible to cascade two 8 port tenor to make it 16 port?

    #25621 Reply

    Hi Tariq,

    Unfortunately it is not possible to cascade the current analogue Tenor’s in the true sense.

    The issue is that the two devices will have different IP addresses, so static routes would need to be set up to both units.

    The easiest way around this is to use the in-built GateKeeper funtionality of the Tenor. Make one of the devices the GateKeeper for both A800’s, you would need to buy a 8 port GateKeeper upgrade option for the master Tenor to allow it to GateKeep 16 simultaneous calls.

    On a positive note, Quintum are soon to release the new AX series which will be available with up to 24 analogue ports. Like the new DX series this will come with the CMS operating system and therefore allow CODEC auto-negotiation etc.

    Hope this helps.


    #25622 Reply

    any body help me to configure tenor AXT800 Voip gateway.

    #25623 Reply

    my prbolem is this i want do call from tnore AX auintum to A800 quintum , can you help me please in this matter i am so disterb about it plz plz ,
    how i do call from tenor AX quintum to A 800 series plz guide me as soon as possible plz

Viewing 6 posts - 1 through 6 (of 6 total)
Reply To: Reply #25619 in quintum with netmeeting
Your information:

<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">