Generic selectors
Exact matches only
Search in title
Search in content


  • This topic has 1 reply, 1 voice, and was last updated 18 years ago by Gonzo.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #25432 Reply

    hi all,

    anyone know how to configure
    TENOR A400/A800 to have DNIS based authentication and accept calls.


    #25433 Reply

    This is from the manual. Are you trying to do pinless on a prepay operation?

    Prompt Level: config pstntg 1# and config pbxtg 1#
    Syntax: ivrtype {0 | 1 | 2 | 3 | 4 | 5 | 6 | 9}

    1 Provides 2nd Dial Tone
    2 Pre-paid Calling Card
    3 Post-paid Calling Account – Type 0
    4 ANI Authorization – Type 1
    5 ANI Authorization – Type 2
    6 Post-paid Calling Account – Type 1

    9 ANI Authorization – Type 3

    Guidelines: Typically, you would have the Trunk Group’s passthru set to “no” for IVR applications.
    • If you set this option to 1 (2nd Dial Tone), the Tenor will authenticate PIN entries
    against the value set in the pincode field. A RADIUS Server is not required for
    this ivrtype, the Tenor provides the Authentication & Authorization in this case.
    o The difference between Type 1 and Type 2 is that in ANI Type 1
    (ivrtype = 4), when a match is not found on the RADIUS Server for an
    ANI, the call is disconnected. In other words, the ANI must be known by
    the RADIUS Server to place a call. In ANI Type 2 (ivrtype = 5), if the
    ANI does not match, the caller may manually enter in the Account
    Number, so that calls can be made, no matter what location the caller is
    calling from.
    For ANI Type 3 (ivrtype = 9) incoming calls over PRI, the ANI is passed
    to the RADIUS Server for Authentication and Authorization, and when
    successful, the call is connected automatically to a destination based on
    the DNIS, but determined by the RADIUS Server. If the setup message
    does not include both the ANI & the Called Number, the call will be
    Examples: config pstntg 1# ivrtype 2 – Sets the ivrtype to Prepaid Calling Card.
    Related Cmds: pincode, ivraccessnumber, ivranswerdelay, ivraccountlength, ivrpinlength,
    ivrcardlength, ivrlanguage, ivrlangtype, multisession, retrycounter
    See the RADIUS/IVR Chapter of Section IX (9) for an
    “IVR Quick-Start Guide” or the RADIUS Developer’s
    Guide (downloadable from the Customer Service
    section of for many more details
    regarding these processes.
    • If you set this option to 2 (Pre-paid Calling Card), you will have the option to set
    the card length (ivrcardlength), and to choose the Language for the IVR
    Prompts played on this TG (ivrlanguage). .
    • If you set this option to 3 or 6 (Post-paid Calling Card Types 0 & 1), you will
    have the option to set the account length and the PIN length (ivraccountlength
    & ivrpinlength), and to choose the Language for the IVR Prompts played on
    this TG (ivrlanguage).
    o The difference between Type 0 and Type 1is that Type 0 (ivrtype = 3)
    sends the Account Number and PIN in 2 separate fields to the RADIUS
    server and Type 1 (IVRType = 6) is interoperable with RADIUS Servers
    which accept those 2 pieces of information together in one field.
    If you set this option to 4, 5 or 9 (ANI Authorization Types 1, 2 or 3), the Tenor
    will transmit the ANI of the Calling Party to the RADIUS Server for “automatic”
    authorization to place calls.

Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Reply #25433 in TENOR & DNIS
Your information:

<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">