Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

H323 behind NAT

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #25042
    Fred
    Guest

    I try to make VOIP phone call using
    a H323 gateway behind an ADSL router
    with NAT.
    I get a dial tone from my gateway,
    and when I dial I do not hear
    anything : no ringing or answer from
    the called party.

    Do you know what I should do ?

    #25043
    Ben
    Guest

    Depends on whether your ADSL router/firewall has dynamic h323 support. If not:-

    Find out what UDP ports the gateway is using for voice and configure these for static PAT on the ADSL router. Also configure the standard H323 signalling ports as static PAT on the router. I think it will also help if your h323 gw allows you enetr a NAT ip address in the config. That way ti will use the right IP when it embeds its IP in teh H245 messages…#
    Hope this helps…

    #25044
    vurcos
    Guest

    I have a linksys router that does NAT. In order for me to make VoIP calls from Internal Gateway I setup Port forwarding.
    VegaStream Gateway:
    application: Port #:
    SIP 5060-5070
    RTP 2000-3000

    2 way audio isn’t an issue when setup properly. Please be aware not only is the setup for SIP similar, but you also have to take into account the Port numbers vary by Manufacture.

    I hope this helps.

    Most gateways & phones have a config option for such applications.

    #25045
    Fred
    Guest

    Hi vurcos,

    Which linksys router are you using?

    #25046
    Dan C
    Guest

    Fred … it sounds like you are not getting out past the router to the outside world. Did you set up the port forwarding?

    #25047
    Fred
    Guest

    Yes. I set up port forwarding and it works for SIP : I can make a SIP call but I cannot make a call using H323

    #25048
    frogger
    Guest

    try putting the ip of the device in the DMZ.

Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.