[VOIP Newbie]

I am new to these VOIP equipment I was wondering if there was a way of forwarding a pots phone line from one location to another by using 2 Cisco UBR924? Basically have a phone # at one location and tie it to another ubr924 at the other location? I am thinking I probably need to do FXO to FXS is this correct. These ubr924 modems are FXS ports at both ends. Thanks

[vurcos]

This is very possible. It really depends on the functionality of the equipment.

I’ve done this on a VegaStream 8 port FXO calling another 8 port FXO Vega.

so: PSTN—FXOCalifornia—via H.323/SIP/MGCP/whatever—FXONew York—PSTN

The Vega in California would receive a call on its POTS ports (vega contains dialing rules) and sends the call to the FXO in New York via VoIP, then the Vega in New York will have a pre-configured number to send the call to.

very basic and easy to setup.

[Andrey Tsadikov]

Vurcus hi!
I want to make some configuration to the new vega50 and conect to him 8 analog lines .
It is possibule?
How I need to do it?
Can you help me with configuration?

[Dan C]

VOIP Newbie,

Yes you are right .. you need to have the FXO on the POTS side and the FXS on the other.

[Author]

Posts