Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

fxs to fxo converter

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #24737
    elvoiptech
    Guest

    has anyone bought the fxs to fxo converter from ebay? If so, does it work? I have a cisco 827-4v and I can’t make it work– help please– thanks

    #24738
    nadie
    Guest

    It is a FXS to FXS adapter. It shouls sit betwen a normal phone line (line from the phone company) and your VOIP box.
    To try it, install it betwen two normal phone lines to start with. Call the number of one of the phone lines. After it rings, the box should answer the call and present you the dial tone of the second line. Then you “overdial” with DTMF tones the second call.
    If there is a period of silence of the box detects a busy tone , the call should be dropped.
    If that works, you could disconnect the second phone line and replace it with your VOIP box (ATA 186, Ericsson adapter or 847v box)
    Good luck.

    #24739
    elvoiptech
    Guest

    When i call it from the outside I get a second dial tone, but then i try to call an internal number it drops the call–
    Nadie– please send me your email

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.