Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Calling Quintum A800 from Netmeeting

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #24437
    Mike
    Guest

    I am not able to call A800 thru netmeeting.

    Can anyone help me to sort out this problem.

    Thanks
    Mike

    #24438
    Serge
    Guest

    You have to disable H245 Tunneling and not use T.38 fax protocol in your tenor.

    #24439
    greg
    Guest

    how i can deseable T.38 and H245?
    With the CLI command?

    Thanks

    #24440
    Mike
    Guest

    Thanks Serge,

    I did as you told me, the call is dialing out from the tenor, but the netmeeting client disconnects as soon as the tenor dials out, with an error message “THE PERSON YOU CALLED IS NOT ABLE TO ACCEPT NETMEETING CALLS”….. Would appreciate your suggestions..

    Could this be a codec problem?? my tenor is configured at G729ab

    #24441
    lucke@sky
    Guest

    Hi,
    Sure your issue now is the codec.
    Only use G723r63 on your Quintum device.
    Let me now your IM id. Bye.

    #24442
    Austin
    Guest

    How can we able to know that digits r sends to other end.
    connecting netmeeting get problem through tenorA800.
    Also how much attenuation has to put in tx path.

    #24443
    Manny
    Guest

    connecting to tenor from netmeeting causes conf.exe error, any workaround and solutions? thanks

Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.