Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Configuring Quintum

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #24229
    Ahmed
    Guest

    I am looking for assistance in configuring a Quintum A800 – if someone can help kindly contact.

    #24230
    Tony
    Guest

    What do you need to configure. Tell me more about what you want to accomplish with that A800.

    #24231
    Teodor Georgiev
    Guest

    When I started with Quintum I was quite happy to meet a guy on this forum named Vassil. It seems that he is quite knowledgeable in running Quintum in any environment. Try to agree with him. Probably he is still around.

    #24232
    lucke@sky
    Guest

    hi maybe i could help you too.
    let me know what do you need…?
    saludos.

    #24233
    Path
    Guest

    Hi…what is the procedure for recording a customer IVR on Quintum Tenor A800?

    #24234
    Path
    Guest

    Can anyone help me with retrieving session start time on Quintum Tenor A800?

    #24235
    Ahmed
    Guest

    First of all, thanks for your input. I need to setup my A800 for incoming call from foreign IP.
    So far , I have setup codec, LAMpattern , Primary border element (as there are 2 )..
    Anything else??

    #24236
    noname
    Guest

    Do you have the whole manual for the Quintum ????It is a document about 300 pages, where it details every command available.
    One of the best tools to troubleshoot.
    Anyone interested ,send your e-mail to mike3799@yahoo.com.

    You e-mail needs to be good for about 3.5 mb. Those with yahoo, clean up a little the old messages.

    The cost: after receiving the document just say “thanks”.

    Noname.

    #24237
    Zulfikar
    Guest

    hi all, any body know setup quintum A800, work by netmetting. if possible send information

    Thanks everybody

    #24238
    KS
    Guest

    how do i tell quintum A800
    when the user enter the destination number

    if the number stats with 001 use the gateway no 1

    if the number starts with 0044 use the gateway no2

    if the number starts with 0017 use the pstn port and dial the number.

    I don’t mind even using a external software and doing this, please let me know how to do this

Viewing 10 posts - 1 through 10 (of 10 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.