Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Your opinion about Quintum?

Viewing 15 posts - 91 through 105 (of 287 total)
  • Author
    Posts
  • #23757
    Clerk
    Guest

    2 EDS
    the configuration is relatively simple.
    send me an e-mail to gh@sicres.md and i’ll help you with configuration.

    #23758
    kashif
    Guest

    EDS,

    it is not very difficult to config. i have some experience in it. if you want i can help you set it up. email: kashifned@yahoo.com

    #23759
    jc_hui
    Guest

    ED,

    First you must understand the gateway command, then you draw out the requirement of you need. With the table requirement you draw should be no problem.

    I was implemented to my multinational company. Or you give me the specification and requirement I help you to confgure it.

    Have anyone facing ports blocking issue. Especially the RADIUS, H323 and TFTP for voice prompt.

    #23760
    Nasir
    Guest

    EDS

    go and check this address http://www.techland.co.uk/shared/techdocs/cli419.pdf you will find all you need.

    send me and email to Abmoalin@Yahoo.com we will share our knowlodgy

    hopefully thing will ok for you

    #23761
    john
    Guest

    Hi,
    I m planning to buy quintom softswitch can any body suggest which is best for us and where can i get the brocture for quintom softswitch

    John

    #23762
    Roup
    Guest

    Vasil
    Hello
    Can you tell me how I make quintum 800 redirected IP’s(Behined a Proxy) availeble on the net

    #23763
    Hillol
    Guest

    Hi, All;

    I have a Quintum D-2400 and a T1 GSM Channel Bank. Now, i want to do call origination for pre-paid calling card for this i have IVR, Radius, billing software installed in a server. can anybody sent the Quintum D-2400 configuration for this perpose.

    #23764
    Khurram
    Guest

    Hi i am using Qintum A800 and AS 400 i am facing Echo problem. Is there someone here to help me to figure it out that which configuration we do to solve that echo.

    #23765
    www.sysmaster.net
    Guest

    Make sure that you have set your echo cancellation parameters on your 5400:
    For example:
    voice-port 1/1:D
    input gain 2
    echo-cancel coverage 32 (This is the ECHO CANCEL parameter I was talking about)
    cptone GB
    timeouts initial 120
    timeouts interdigit 2
    timeouts call-disconnect infinity
    timeouts ringing 60
    description TRUNK#1
    bearer-cap Speech

    #23766
    Qguy
    Guest

    Need help my quintum is on a booting loop. Keeps reloading at this point

    Scanning for zip file…………….
    Found file at 0x2830020

    am unable to key in any commands at console

    #23767
    Qguy
    Guest

    2 Noname

    I cannot access my A800 neither through Console or telnet, after i changed the IP, Through consol i get a resetting loop

    Scanning for zip file…………….
    Found file at 0x2830020

    I cannot get to Modify(M) or continue (C),

    #23768
    Khurram
    Guest

    I cannot access my A800 neither through Console or telnet, after i changed the IP, Through consol i get a resetting loop

    Scanning for zip file…………….
    Found file at 0x2830020

    I cannot get to Modify(M) or continue (C),

    #23769
    Qguy
    Guest

    Please help me to get into my A800, i cannot get in via telnet or console.

    #23770
    bodiii
    Guest

    How can i configure the quintom to call from one pbx port to enather on same quintum?

    #23771
    bodiii
    Guest

    How can i configure the quintom to call from one pbx port to enather on same quintum?

Viewing 15 posts - 91 through 105 (of 287 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.