Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Your opinion about Quintum?

Viewing 2 posts - 286 through 287 (of 287 total)
  • Author
    Posts
  • #23952
    Shayan Nasir
    Guest

    Hi

    I have a Quintum Tenor A800 series. It came pre configured with other Ip Address all what I’m to do is to change the IP address A.B.C.D Port 1111

    Syntax :

    Config #

    Now wat i do ?
    Please Help me

    Shayan_2k@hotmail.com

    #23953
    MikeM to Shayan
    Guest

    Shayan,

    If you are talking about the IP address where the tenor will send calls to, the destination IP address, this can be found in the

    config be prompt. If you do a print there, you should see at least 1 static route prompt. The static route prompt are where you configure the term points. Each sr prompt can be configured with one destination IP address. So if you see static route 1, you can go to static 1 and print there and see where the IP address is.

    There is also a Command Line Reference guide available for the A800 on Quintum’s web site where you can look up static route for more help.

Viewing 2 posts - 286 through 287 (of 287 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.