Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Integration with PBX

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #23292
    Kishore
    Guest

    Hi
    I am working on a VoIP solution. I have 2 offices using Ericsson PBXs with 10 lines coming in from the PSTN and 100 extensions at each location. I intend to use Cisco 1761V. What I need help in is how many FXO modules I need to use on the router.
    I would appreciate if any one could help me out on this.

    Thanks
    Kishore

    #23293
    Morgan de Ruiter
    Guest

    It depense on what type of Ericsson you have. Is it a MD110?
    Try te get hold of a IP card will make your live simple.
    You could also do this with the S0 bus. enable 2 of them on each site and connect them with 2 BRI Vwic card. This way you can also use compression.
    If you use FXO cards than you will have to use for every line 1 FXO card. That meens that you need a big router to make it happen.

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.