- This topic has 206 replies, 1 voice, and was last updated 13 years, 10 months ago by Sabuz.
6th May 2004 at 14:00 #22813BipuGuest
If I didn’t get it wrong, it seems your customer is intended to make calls from pbx port to your gw over IP. If that’s it, he should add an static route under be with right destination gateway and prefixes.
Cheers!!!7th May 2004 at 10:02 #22814venkatGuest
hi bipu ,
Thanks for your reply. As u said its correct .But i want to know how to configure prefix that is dialplan .
Please help in that regard.
Venkat9th May 2004 at 20:12 #22815BipuGuest
Well, ask him to try quintum doccumentations to find how to add routes. I won’t like to explain such issues. If you still want me to configure it for him he will have have to pay for this.23rd May 2004 at 23:40 #22816scorpGuest
i have got A800 can any one tell me why this coming like ASn falied major software error like 722 of .cpp
thankx in advance
regards25th May 2004 at 03:10 #22817smithGuest
I am looking for A800 quintum tenor gateway configuration for both in coming and out going calls29th May 2004 at 14:49 #22818VoIP2Guest
I have a problem with a A400, I configured it and it was working ok, but suddenly the PBX ports are not ringing, just the lights turn on when there is an incoming call, does anybody have an idea why this happens?26th August 2004 at 19:25 #22819edisonGuest
i have a problen whit a VoIP edge q-4fxs, i want to know how i configure polarity reversal…21st September 2004 at 08:02 #22820krishnaGuest
my quintum A800 is in bypass mode &
is not telneting.when i go into it through serial cable and check active alarms it say it is in bypass mode.can any one help me how to bring it into normal mode,i would be really greatfull to u.24th September 2004 at 00:18 #22821jerryGuest
krishna,,,about the A800 tenor bypass mode.. the alarm LED is flashing,,, …. Try this… used (GUI) graphical user interface…using (IE)… Internet Exlorer…then click the online button…at the maintenance option… (:7th October 2004 at 12:16 #22822nemoGuest
I need to know all about configuring quintum A 800 to do VoIP business.
Please help me.7th October 2004 at 20:50 #22823NCMGuest
need some help writte to
tEk Support just for Tenor A8008th October 2004 at 19:11 #22824Bilal SheikhGuest
when i checked my log it is disconnecting calls after 1 call with cause code 47. plz let me know if any of us knows abt that
Bilal9th October 2004 at 07:25 #22825VIPINGuest
Looking for support for NBX 100 PABX.The problem faced is all IP handsets are not ringing for any in coming call.The system is designed on analog in puts.
thsnks16th October 2004 at 06:25 #22826MEZAMOGuest
I have a lot of reading in voip, but I did not tried yet.What I planning to do is this:
1-I wants to establish a gateway her at my location.
2- My customer using ip phone (dailup) will call through my gateway to pstn line.
My question is: How can I do that?
I appreciate your input
Thanks25th October 2004 at 15:48 #22827Jan TofertGuest
I would like to know how to direct calls to my other gateways using QIIQ Calling Card billing solutions.Any help