Generic selectors
Exact matches only
Search in title
Search in content

tenor A800

Viewing 15 posts - 76 through 90 (of 207 total)
  • Author
    Posts
  • #22813 Reply
    Bipu
    Guest

    Pavan,
    If I didn’t get it wrong, it seems your customer is intended to make calls from pbx port to your gw over IP. If that’s it, he should add an static route under be with right destination gateway and prefixes.
    Cheers!!!

    #22814 Reply
    venkat
    Guest

    hi bipu ,

    Thanks for your reply. As u said its correct .But i want to know how to configure prefix that is dialplan .

    Please help in that regard.

    Venkat

    #22815 Reply
    Bipu
    Guest

    Hi
    Well, ask him to try quintum doccumentations to find how to add routes. I won’t like to explain such issues. If you still want me to configure it for him he will have have to pay for this.

    #22816 Reply
    scorp
    Guest

    i have got A800 can any one tell me why this coming like ASn falied major software error like 722 of .cpp

    thankx in advance

    regards

    #22817 Reply
    smith
    Guest

    I am looking for A800 quintum tenor gateway configuration for both in coming and out going calls

    #22818 Reply
    VoIP2
    Guest

    I have a problem with a A400, I configured it and it was working ok, but suddenly the PBX ports are not ringing, just the lights turn on when there is an incoming call, does anybody have an idea why this happens?

    #22819 Reply
    edison
    Guest

    i have a problen whit a VoIP edge q-4fxs, i want to know how i configure polarity reversal…

    #22820 Reply
    krishna
    Guest

    my quintum A800 is in bypass mode &
    is not telneting.when i go into it through serial cable and check active alarms it say it is in bypass mode.can any one help me how to bring it into normal mode,i would be really greatfull to u.

    #22821 Reply
    jerry
    Guest

    krishna,,,about the A800 tenor bypass mode.. the alarm LED is flashing,,, …. Try this… used (GUI) graphical user interface…using (IE)… Internet Exlorer…then click the online button…at the maintenance option… (:

    #22822 Reply
    nemo
    Guest

    I need to know all about configuring quintum A 800 to do VoIP business.
    Please help me.

    #22823 Reply
    NCM
    Guest

    need some help writte to
    tEk Support just for Tenor A800

    #22824 Reply
    Bilal Sheikh
    Guest

    when i checked my log it is disconnecting calls after 1 call with cause code 47. plz let me know if any of us knows abt that

    regards
    Bilal

    #22825 Reply
    VIPIN
    Guest

    Looking for support for NBX 100 PABX.The problem faced is all IP handsets are not ringing for any in coming call.The system is designed on analog in puts.

    thsnks

    #22826 Reply
    MEZAMO
    Guest

    Hillo all,
    I have a lot of reading in voip, but I did not tried yet.What I planning to do is this:
    1-I wants to establish a gateway her at my location.
    2- My customer using ip phone (dailup) will call through my gateway to pstn line.
    My question is: How can I do that?
    I appreciate your input
    Thanks

    #22827 Reply
    Jan Tofert
    Guest

    I would like to know how to direct calls to my other gateways using QIIQ Calling Card billing solutions.Any help

Viewing 15 posts - 76 through 90 (of 207 total)
Reply To: Reply #22814 in tenor A800
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">