Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Convert T1 Access Server To E1

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #22722
    Reza Fakhr Attar
    Guest

    Dear Sir ,
    I Have Access Server 5300 8 T1 ๐Ÿ™‚
    But One Person Convert To 8 E1 ๐Ÿ™‚
    Please Help Me ๐Ÿ™‚
    Tanks
    Bye

    #22723
    Mohammad Saman
    Guest

    Hi. There is no way to convert a T1 card to E1 card without changing the cards, but you can translate T1 E1 with RAD equipment, although you will loose some channels. See http://www.rad.com
    If you’re in Iran you need to be carefuk with RAD equipment it’s made in Israel.

    #22724
    Reza Fakhr Attar
    Guest

    No My Friend
    no Change Hardware , Upgrade Software . Software Upgrade T1 To E1 . Please Help Me .

    #22725
    Mohammad Saman
    Guest

    Sorry I don’t know of a way to solve your proble, ๐Ÿ™

    #22726
    Thomas
    Guest

    Reza,

    I heard some people are able to convert T1’s to E1’s by using some software image, but I don’t know how. If you find out a solution, please let me know. I’m also interested.

    Thanks,

    #22727
    No Way
    Guest

    There is no way to convert E1 to T1 in software. different framing, different line coding, completely different at layer 1.

    As the first response says you need buy a convertor from a vendor such as RAD. You wil never get a full E1 because 30 into 24 does not go…

    #22728
    Appa KH
    Guest

    Hi,
    The best way is to ask CISCO how to convert it. I think the conversion of E1 to T1 is a software since the no. of lines are reduced from 30 to 24.

Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.