- This topic has 177 replies, 1 voice, and was last updated 14 years, 6 months ago by Pooya.
20th May 2004 at 18:09 #22558AugustGuest
I have problem with my quintum.
Software Version p4-2-20-21(LEC)
Problem is call comes in my gw but it doesnt activate.
call proc then after 10 sec it becomes term disc
I am using phonecell telular with that. i’ve done test dial, and seems fine.
Please help me.25th May 2004 at 19:27 #22559bodiGuest
Hi could you send me quitum tenor asg200 configuration manual to email address
email@example.com June 2004 at 08:08 #22560vinceGuest
We have Quintum Tenor A800. Our problem is that it keeps on resetting every few hours. What is the problem? What is the solution?22nd June 2004 at 10:40 #22561BertCamRoyGuest
Pls help me with my axt2400 quintum. Can anyone pls give me common settings for merely making a call.
More power to VOIP quintum….
BertCamRoy22nd June 2004 at 11:01 #22562ClerkGuest
there is a CDRPlus Manager – a software for Quintum Tenors and CallRelay, wich allow to do exact you want.
For additional information, please contact me by e-mail: firstname.lastname@example.org June 2004 at 11:05 #22563ClerkGuest
a had the same problem
try to do following:
1. install latest firmware
2. download the configuration
3. reset the tenor to factory defaults
4. upload the configuration
PS. on pstn trunk deactivate ANI function (there is a problem with its implementation)22nd June 2004 at 12:40 #22564Noname to BertGuest
If you have a static I.P. address on public internet I could get you setup to make calls for testing.
Write to mike3799@yahoo or get me in messager, after 5:00 P.M., US central time.
Best regards.23rd June 2004 at 11:51 #22565Shahid KhanGuest
Hi, I have successfully gotten quintum working on one phone, thanks to the kind people here. Heres what I want to do now.. I have multiple phones connected to the pbx ports of the quintum a800. If someone calls to my number (suppose 5551212) and that is already in use, he should be switched to another phone on the quintum. IHow will I be able to do that? Thanks in advance….23rd June 2004 at 12:42 #22566Noname to ShahidGuest
It is already in service that way.
If you entered the “5551212” as a huntpubldn type of number, you created a group that will ring the first available port on the PBX side.
In other words, you have a hunting group, with the same phone number on all the ports, as a first come ,first serve type od service.
Any doubts, write me.23rd June 2004 at 18:48 #22567shahidGuest
if anyone like to help then i deserve it.plz send the quintum tenor A800 manual to email@example.com June 2004 at 05:46 #22568vinceGuest
thanks for your reply. another problem crop up. it is not only our quintum A800 that keeps on resetting but also our quintum d3000 unit. what’s weird is that both units are placed in the same shelves, while we have another quintum a800 placed in another but does not have the same problem.28th July 2004 at 21:32 #22569HI peopleGuest
if anybody could asnwer some of my simple questions pls do. This is only theory…
what is the use of enabling :
a) Primary gatekeeper switchback
b) relay progress
c) Default h245 tunneling
d) start h245 collision
e) packet server
pls tell me how it will change the performance of my equipment if i enable each of those things. Pls tell me when and how to use it?
thank you very much…
i was able to run my axt2400 but these terms i must really understand so i could make my quintum run at its optimum performance.30th July 2004 at 11:43 #22570NonameGuest
Primary gatekeeper switchback:
In case that the primary gatekeeper stops responding, the equipment could switch to a secondary one.
Once it is working via the sec. gk, it does have the option of switching back to the original or staying on the secondary.
That is what the setting is about.
Packet saver: If you have the option on your box, and the remote box also have the option, and you have several calls at the same time betwen the two gateways with packet saver enabled, you will save some bandwith on the interent connection.
remember, omly if you have several calls at the same time ,betwen the two boxes.
It will not give you any advantage on single calls to multiple boxes, even if they have packet saver.
The savings are around 15 to 30 %,depending on the load.
Best case will be fully load of calls, point ot point betwen the boxes.4th August 2004 at 03:05 #22571callshopGuest
Have new Quintum ASG400 trying to connect to ciscoi AS5350
Quintum in India going through VSNL leased line to AS5350 in US data center of provider…
everything looks ok, but when we dial number, the phone instantly returns a fast busy signal..
anyone know of what can be issue on India side?
Paid for and waiting for days for Quintum to directl do installaton, but they are slow and not giving a date and time..
looking for India based Quintum expert for Quintum configuration…
Thanks in Advance8th August 2004 at 15:45 #22572ivanGuest
I have a problem with all my tenors(A400/A800/ASM200/ASM400) all of the tenors are resetting themselves in 10mins time or after the first call from pstn. These quintums are at the diffrent places and suddenly all of them start to reset them selves and also you can’t ping one of these outside the local network