- This topic has 2 replies, 1 voice, and was last updated 19 years, 7 months ago by siva.
29th November 2002 at 16:44 #22494BobGuest
Any1 had problem vith cisco AS53000 reporting 30 Voice resources and having five c549 modules inside. It should say 60 Voice Channels.
-#sh ver —————
Cisco Internetwork Operating System Software
IOS ™ 5300 Software (C5300-IS-M), Version 12.2(2)XB6, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Mon 17-Jun-02 18:23 by hwcheng
Image text-base: 0x600089B0, data-base: 0x6111E000
ROM: System Bootstrap, Version 12.0(2)XD1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
BOOTLDR: 5300 Software (C5300-BOOT-M), Version 12.0(4)T1, RELEASE SOFTWARE (fc1)
ciscoAlfaTel uptime is 21 hours, 14 minutes
System returned to ROM by reload at 20:22:24 UTC Thu Nov 28 2002
System restarted at 20:23:12 UTC Thu Nov 28 2002
System image file is “flash:c5300-is-mz.122-2.XB6.bin”
cisco AS5300 (R4K) processor (revision A.32) with 131072K/16384K bytes of memory.
Processor board ID XXXREMOVEDXXXX
R4700 CPU at 150Mhz, Implementation 33, Rev 1.0, 512KB L2 Cache
Channelized E1, Version 1.0.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
Primary Rate ISDN software, Version 1.1.
Backplane revision 2
Manufacture Cookie Info:
EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x30,
Board Hardware Version 3.2, Item Number 800-2544-04,
Board Revision B0, Serial Number XXXREMOVEDXXX,
PLD/ISP Version 0.0, Manufacture Date 13-Jul-2000.
1 Ethernet/IEEE 802.3 interface(s)
1 FastEthernet/IEEE 802.3 interface(s)
128 Serial network interface(s)
4 Channelized E1/PRI port(s)
30 Voice resource(s)
128K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
8192K bytes of processor board Boot flash (Read/Write)
Configuration register is 0x2102
#sh vfc 1 board
VFC board state is UP, vfc status VCWARE running(0x4)
VFC board in slot 1 with 30 dsps
#sh vfc 1 technology
Technology in VFC slot 1 is C549
#sh vfc 1 directory
Files in slot 1 VFC flash:
File Name Size (Bytes)
1 . vcw-vfc-mz.c549.hc.9.20a.bin 404348
2 . btl-vfc-l.0.1.bin 1882
3 . btj-vfc-l.0.1.bin 4174
4 . jbc-vfc-l.3.0.bin 12808
5 . cor-vfc-hc-l.3.6.16al.bin 215994
6 . bas-vfc-hc-l.3.6.16al.bin 210
7 . fax-vfc-hc-l.3.6.16al.bin 23764
8 . cdc-g711-hc-l.3.6.16al.bin 2406
9 . cdc-g726-hc-l.3.6.16al.bin 5602
10. cdc-g729-hc-l.3.6.16al.bin 31782
11. cdc-g728-hc-l.3.6.16al.bin 22198
12. cdc-g723.1-hc-l.3.6.16al.bin 33024
13. cdc-gsmfr-hc-l.3.6.16al.bin 9282
14. cdc-gefr-hc-l.3.6.16al.bin 28536
#sh vfc 1 version dspware
Version of Dspware in VFC slot 1 is 3.6.16aL
#sh vfc 1 version vcware
Voice Feature Card in Slot 1:
VCware Version : 9.20a
ROM Monitor Version: 1.3
DSPware Version : 3.6.16aL
Technology : C5495th December 2002 at 01:27 #22495ZopaGuest
do check the codec complexity if it’s at medium.
“4 Channelized E1/PRI port” means 4 E1 = 120 voice channels
“five c549 modules inside” is 5 PVDM module with 3 DSPs/PVDM
i.e 3 Dsp per PVDM module
15 DSPs in all
each DSp carries 4 channels…in al you should have 60 voice channels, if u get something contrary to this, check the codec complexity for appropriate settings.
if codec complexity is set to be high, it reduces the voice channel by half
simply set your codec complexity to “MEDIUM”.
EMAIL ME AT firstname.lastname@example.org if that does not help but i’m sure it will.29th April 2004 at 20:22 #22496sivaGuest
I have problem with a Cisco 5300 with 549 type DSP cards, if I load the 549 firmware, the boot indicates I have incompatible card+firmware. If I load 542 firmware, there are no console errors, but the DSP cards do not come up (if I go to test dsp> show stats => indicates “firmware error”).
Any suggestions anyone? TIA.
- The forum ‘Voice over IP’ is closed to new topics and replies.