Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Cisco ATA186

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #22226
    Rajan
    Guest

    I want to configure ATA 186 as a client to my gatekeeper. Can anybody suggest suitable configuration. I am able to connect and place calls through my gatekeeper using netmeeting client. Two ATA 186’s pointing other ATA as gateway configuration is working fine. When replacing with gateway/gatekeeper informations, I don’t get dialtone.

    #22227
    Dave
    Guest

    I hope this will help. it’s a link to deltathree setup configuration using the ATA device. replace deltathree’s info. with your gateway information.

    http://corp.deltathree.com/productsandservices/devicesapplications/ATAConfiguration.html

    It’s a long url address sorry.
    Good luck

    #22228
    allen
    Guest

    I want to set up the ATA186/SIP for voive on port 1 and FAX pass-thru on port 2. Any help

Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.