Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

what is h.245?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #21827
    alex
    Guest

    where can i find info on h.245

    #21828
    Tom Howard
    Guest

    You can download the H.245 specification from the I.T.U.

    H.245 is part of the H.323 protocol suite, although it is a protocol in its own right. It is used to negotiate the setup of multimedia channels, allowing two ends to compare their capabilities and open media channels between each other.

    #21829
    Marshall
    Guest

    There is a Training CD offered by GlobalKnowledge.com on H.323 and will be a lot more useful than the ITU site.

    #21830
    ksabc
    Guest

    H.245 is used for exchange the codec/function ability each endpoint owned and decide what Codec/application need start in this IP call;

    Audio Codec example : G.723.1, G.729A, G.711, NetCoder, GSM 6.10 or

    Application Example : T.38 Real-Time Fax, T.120 Shared Board etc.

    Most common used is G.723.1 and G.729A in VOIP Call;

    in h.323 V2, there have Fast Start mode, means no H.245 session exist in the call, replaced with a simple and fast message embedded in the H.225 Q.931 SETUP/ALERTING/CallProgress etc. mesages to fast the connection speed, you know in normal h.245 start mode, there have about more than 10 messages exchanged between two h.323 endpoint, if the internet isn’t fast, it will take about 3-10 seconds to establish the voice connection, so currently Fast Start mode is a standard setting in most gateway;

    Regards

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.