Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Microcontroller based standalone voip

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #21628 Reply
    Bark
    Guest

    Hello

    Me and my varsity partner are undertaking a project to design and possibly implement a simple voice over ip system based on a coldfire microprocessor. We are trying to decide (and are quite devided in opinions) which protocol would be best suited to this application, SIP or H323.

    If you can think of anything else that would be of use to us please tell:)

    #21629 Reply
    Tom Howard
    Guest

    There was a discussion about this recently on this forum. Click here to read it. Essentially, SIP is text based and H.323’s encoding is much more complicated. Once an H.323 stack is built, it is very extensible and robust. But building it is a huge task.

    Good luck.

    #21630 Reply
    Bark
    Guest

    Thanks. It was an interesting read however I dont quite understand what is meant by SIP being text based. Can someone explain this to me?

    cheers

    #21631 Reply
    Tom Howard
    Guest

    It means that with SIP, all messages are sent as ascii text. Using a sniffer, it is very easy to read what’s going on. A typical message might be:

    INVITE: sip:tom@howard.com SIP/2.0

    With H.323, all this information is encoded into a more bandwidth effecient stream, and cannot easily be interpreted without software.

    #21632 Reply
    Mark
    Guest

    Ive decided to use a SIP protocol. Would it be of any advantage to create a program on top of an OS such as uClinux?

    thanks for the help

    #21633 Reply
    peter
    Guest

    Hi Bark

    I been looking into same thing myself. I have found chip maker thathas thewhole DSP part done if you give email I willcontact you about it.

    #21634 Reply
    danny
    Guest

    Would and could someone give the same info DSP chip maker that has the code already done…..

Viewing 7 posts - 1 through 7 (of 7 total)
Reply To: Reply #21629 in Microcontroller based standalone voip
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">