- This topic has 68 replies, 1 voice, and was last updated 14 years, 9 months ago by Harris.
14th April 2003 at 16:01 #21438VOIP over VsatGuest
I want to use voip over Vsat network. I’ve got two nodes. Our lines are 512Kb/s uploads, 128Kbps downloads. What type solution can i use for this network. Our devices are Hughes Direcway DW4000 with 1.2meter anten. If you are any suggestion please e-mail me!15th April 2003 at 15:12 #21439SkyGuest
Spoke with a friend who works at Cisco, their unit showed a 65 ms ping time as well. Guess that is just the way it is.
Still trying to get my unit to be compliant with netmeeting. My ultimate goal is to use the ATA to receive calls from an applet built on my website. It launches netmeeting on the client’s PC and they simply click the call button.
With the ATA installed I should be able to let it ring on a regular phone, thus I can put an answering machine on it as well.
To see an example visit:http://www.vhfonline.com/Interact/VoIP/voip.html13th May 2003 at 14:03 #21440ShailGuest
HI I would like to know if we can make cisco ATA186 to work with net2phone does anyone have the configuration for that please please do share it .14th May 2003 at 13:51 #21441SkyGuest
Here is my config for IConnecthere.com, yours should be similar. Watch for dialplan and media port differences.
In the example below the usernames and pw’ds were spooffed for obvious reasons.
Hope this helps!16th May 2003 at 13:44 #21442ShailGuest
I am trying to configure Cisco ATA to connect to n2p net2phone , so I am looking for the configuration of the same if anybody has it please do post it. I have to configuration for iconnecthere and there is no problem in connecting to it .21st May 2003 at 22:55 #21443SatGuest
I’m also have problems trying to figure out the net2phone settings for a Cisco ATA 186.
Sky’s cnfiguration (thanks anyway) and the pdf you can get from Net2phone’s site for the ATA 186 look different to the configuration I see in my ATA. I think the firmware update modified it.
Has anyone else seen the new/different ATA config screen and know how to modify the settings?
Cheers!10th June 2003 at 06:55 #21444MarkGuest
Does anybody knows a software solution for bridging IP to PSTN calls using pc modem as a hardware.
I tried PC2PHONE but their SW only works with ISDN boards not Fax modem boards. Please email me at markkembelatyahoodotcom.19th June 2003 at 01:31 #21445SkyGuest
Im sure that a modem will not send ringer voltage to a connected telephone to make it ring.20th June 2003 at 13:55 #21446EmoGuest
Example configuriation for Cisco ATA 186 for work with Net2Phone. Link:
http://web.net2phone.com/partnerships/distributors/product/broadband/pdf/n2pciscoataconfigguide.pdf21st July 2003 at 23:53 #21447FaberKGuest
I’ve a Linux server on a ADSL line, and I’m looking for free software to setup a server for voip.
What I mean is, if there is a way to call a fix phone using my adsl.
All this is just for testing, also because my Linux box is just a little more than a toy.
FaberK1st August 2003 at 13:34 #21448DeanGuest
Is there a way to easily configure Netmeeting to make real phone calls?7th August 2003 at 17:35 #21449stressedGuest
Anyone knows how do i retrieve CDR from a PABX using Visual Basic? I can’t seem to get any idea where to start from. Anyone got any sample codes on that please email me. Thanks a million.17th November 2003 at 09:01 #21450abul kashemGuest
we are trying to develope pc2phone
client software (dialer) for use
in pc2phoen applications, so that
a client can make calls using PC
Has any one have sample source code or any links?23rd November 2003 at 17:54 #21451MufaddalGuest
I want to know if anyone has set Indian Dialtone settings in Cisco ATA 186, so that when receiver is picked up we hear similar Dialtone as we get with regular PSTN phone.
thanks in advance.29th November 2003 at 15:05 #21452RizwanGuest
Anyone knows how to configure cisco ata 186 through NAT using go2call.