Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Need Help SS7, Stop Bit After IAM

  • This topic has 3 replies, 1 voice, and was last updated 22 years ago by Alex.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #21305
    RR
    Guest

    Hello,

    Can anyone help me out by giving suggestions, please?

    I’m installing a Clarent GW on SS7 Signalling. The call setup fails -(time out) at Call Initiated. The GW does not send the Stop Digit after IAM Called Number.

    Tried calling Clarent Support. They said it should work just by adding a registry string. Well if it worked, I wouldn’t have sent this message.

    So, anybody ever encountered this problem and solved it? Would appreciate some ideas.

    Thanks.

    RR

    #21306
    Alex
    Guest

    What Gateway version are you using now? Need additional patch if you are using Release 3.1.1SP1 (3.1.1112.0)to slove the end of digit problem…

    #21307
    RR
    Guest

    Hi Alex …

    thank you my man. You’re right, finally solved it. Solved the ST issue with Release 3.1.1 build 1112.7.

    Now stuck with ACM not sent for incoming busy number. Any ideas or suggestions?

    Have a good one.

    #21308
    Alex
    Guest

    Hi RR,

    Would you able to capture the trace file ? Clarent Gateway should able to respond for incoming busy number with correspondent ACM…
    Check with the registy key ….
    Hope this will help…

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.