Setup Cisco MC3810 with Carrier Access This topic has 3 replies, 1 voice, and was last updated 21 years, 2 months ago by Mario. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts 23rd February 2002 at 07:55 #21279 JafonGuest I have a Cisco MC3810 that I am using with a Carrier Access channel bank with FXO cards and loop start. Anyone have any pointers on setting them up properly. Presently experiencing problems. 18th August 2002 at 19:57 #21280 SupoadeGuest you cannot setup CAC with loop-start sinalling cos the CAC Channel bank does not support ans supervision for FXO you could try E&m let me give the circiuts setting for your cisco gateway for Carrier Access framing esf/sf linecode bs8z/ami ds0-group 0 timeslots 1-24 type e&m-immediate-start choose the right franming & linecode for the CAC Let me know exactly your solution i could further in setting up your voice card 23rd August 2002 at 20:18 #21281 ronaldGuest Hi Jafon, I want to config MC3810 for VOIP. Can you let me know what parts do I need? eg. MC3810-HCM6 MC3810V3 etc. email: firstname.lastname@example.org 1st October 2002 at 18:20 #21282 MarioGuest Hi Jafon: Can you please tell me where do you get the Mc3810 with the HCM6 cards? Author Posts Viewing 4 posts - 1 through 4 (of 4 total) The forum ‘Voice over IP’ is closed to new topics and replies.