Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Answer supervision

Viewing 15 posts - 31 through 45 (of 103 total)
  • Author
    Posts
  • #20945
    Jafon2k@hotmail.com
    Guest

    The problem is with the SIP phone.
    I had a tech that was tryin gto test my route using a Cisco ATA phone.
    He was operating thru a SIP proxy server.
    It would not work.
    Trying testing using a more traditional (h.323) gateway, first.
    Then use a “traditional” gateway to test with SIP.

    #20946
    Ashish Dwivedi
    Guest

    hi All,
    I am having a problem with one-way voice from openphone to PSTN through cisco AS 5300 voice gateway .i am not geting voice on openphone application. This is when i used onlu gsm 6.10 codec at openphone side. otherwise if i enable other or all codec , i even could not make connection.
    If any body has faced the same problem , plz help me out.

    Regards
    Ashish

    #20947
    Likky
    Guest

    Hi Mohammad Saman.
    I would like to get one-Paleadis to connect my 5300 for E1 FXO. If it works fine, please contact me

    Anybody know what’s channel bank product that work with 5300 E1 FXO and very cheap price?

    #20948
    Hatef-Yazdani
    Guest

    Hi,

    Can i connect majol e1 NM-2ce1U in the router 2620 and connect channel bank. If then yes please introducing Channel bank.

    Thanks
    H-Yazdani

    #20949
    Jessica
    Guest

    Is Wink start signalling an analog technology?

    Thanks for your answer in advance.

    #20950
    Matt
    Guest

    Hi All,
    I am having problems with AS5300’s conectted to an Ericson AXE-10 via 4 T-1’s. The DS0-Group is set to e&m-fgb DTMF. About 30% of my calls go “high and dry” but the AXE-10 sees the 5300’s signaling bits go “high” indicating Answer Supervision. Is this a signaling issue between the AXE-10 and the 5300 or has the call been answered and only a one way talk path established?
    Any help would be appreciated.
    Thanks,
    Matt

    #20951
    Wijayakusuma
    Guest

    To Mohamad Saman…

    Hi.. I appologize to ask this question, but can you please tell me the diagram and configuration of your VoIP hardware…

    Thanks

    #20952
    Cisco MC3810
    Guest

    What is the usage of this router in a VOIP network ?

    #20953
    Hisham
    Guest

    I am using P32mxi with NMS AG4000 E1 Board , when i dial its ringing but its not going thru the E1 board, i need hel please.

    #20954
    Aquereburu
    Guest

    How can you blocked call ID on AS5300

    #20955
    aquereburu
    Guest

    Does anyone knows how to block call ID using cisco AS5300 or Quintum A3200 ?

    #20956
    M.Bilal Fassy
    Guest

    Can anybody give me dipswitch setting for carrier access for T1 using cisco mc3810.

    Im having problems on answer supervision.

    This is my config.

    controller T1 0
    mode cas
    framing sf
    clock source internal
    linecode ami
    ds0-group 0 timeslots 1-24 type fxo-loop-start
    ds0 busyout 2-24 hard

    #20957
    Ali Karimian
    Guest

    Hi dears
    I have a VOIP system with Cisco AS5300, and Carrier Access channel bank,
    but this system dosnt support Answer supervision.
    whats your solution,
    Can I install a new script on router, or changing IOS for solve it?!

    #20958
    TAC
    Guest

    Dump the CAC and replace it with a Pleiades P32MXI.

    #20959
    Mohammad Saman
    Guest

    Alternatively you might want to ask your Telco in Iran to open the signalling/timing procedures for answer supervision, they use AXE switches which are fully capable of that, for some reason the functionality is disabled in the Iranian PSTN

Viewing 15 posts - 31 through 45 (of 103 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.