- This topic has 102 replies, 1 voice, and was last updated 16 years, 2 months ago by
Noe Lana.
-
AuthorPosts
-
1st June 2002 at 11:21 #20945
Jafon2k@hotmail.com
GuestThe problem is with the SIP phone.
I had a tech that was tryin gto test my route using a Cisco ATA phone.
He was operating thru a SIP proxy server.
It would not work.
Trying testing using a more traditional (h.323) gateway, first.
Then use a “traditional” gateway to test with SIP.17th June 2002 at 10:59 #20946Ashish Dwivedi
Guesthi All,
I am having a problem with one-way voice from openphone to PSTN through cisco AS 5300 voice gateway .i am not geting voice on openphone application. This is when i used onlu gsm 6.10 codec at openphone side. otherwise if i enable other or all codec , i even could not make connection.
If any body has faced the same problem , plz help me out.Regards
Ashish1st July 2002 at 04:08 #20947Likky
GuestHi Mohammad Saman.
I would like to get one-Paleadis to connect my 5300 for E1 FXO. If it works fine, please contact meAnybody know what’s channel bank product that work with 5300 E1 FXO and very cheap price?
1st July 2002 at 11:20 #20948Hatef-Yazdani
GuestHi,
Can i connect majol e1 NM-2ce1U in the router 2620 and connect channel bank. If then yes please introducing Channel bank.
Thanks
H-Yazdani22nd August 2002 at 19:31 #20949Jessica
GuestIs Wink start signalling an analog technology?
Thanks for your answer in advance.
8th October 2002 at 13:08 #20950Matt
GuestHi All,
I am having problems with AS5300’s conectted to an Ericson AXE-10 via 4 T-1’s. The DS0-Group is set to e&m-fgb DTMF. About 30% of my calls go “high and dry” but the AXE-10 sees the 5300’s signaling bits go “high” indicating Answer Supervision. Is this a signaling issue between the AXE-10 and the 5300 or has the call been answered and only a one way talk path established?
Any help would be appreciated.
Thanks,
Matt15th October 2002 at 14:10 #20951Wijayakusuma
GuestTo Mohamad Saman…
Hi.. I appologize to ask this question, but can you please tell me the diagram and configuration of your VoIP hardware…
Thanks
31st October 2002 at 15:34 #20952Cisco MC3810
GuestWhat is the usage of this router in a VOIP network ?
20th November 2002 at 16:42 #20953Hisham
GuestI am using P32mxi with NMS AG4000 E1 Board , when i dial its ringing but its not going thru the E1 board, i need hel please.
21st November 2002 at 19:51 #20954Aquereburu
GuestHow can you blocked call ID on AS5300
22nd November 2002 at 19:35 #20955aquereburu
GuestDoes anyone knows how to block call ID using cisco AS5300 or Quintum A3200 ?
7th December 2002 at 18:52 #20956M.Bilal Fassy
GuestCan anybody give me dipswitch setting for carrier access for T1 using cisco mc3810.
Im having problems on answer supervision.
This is my config.
controller T1 0
mode cas
framing sf
clock source internal
linecode ami
ds0-group 0 timeslots 1-24 type fxo-loop-start
ds0 busyout 2-24 hard9th December 2002 at 14:01 #20957Ali Karimian
GuestHi dears
I have a VOIP system with Cisco AS5300, and Carrier Access channel bank,
but this system dosnt support Answer supervision.
whats your solution,
Can I install a new script on router, or changing IOS for solve it?!10th December 2002 at 01:05 #20958TAC
GuestDump the CAC and replace it with a Pleiades P32MXI.
10th December 2002 at 01:19 #20959Mohammad Saman
GuestAlternatively you might want to ask your Telco in Iran to open the signalling/timing procedures for answer supervision, they use AXE switches which are fully capable of that, for some reason the functionality is disabled in the Iranian PSTN
-
AuthorPosts
- The forum ‘Voice over IP’ is closed to new topics and replies.