Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

small office connect

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #20494
    Tarek Hosny
    Guest

    Hi
    What is the Hardware i need to connect 2 offices using VOIP knowing that they are already conected using Framerelay ,i have a PBX in each one, and i need 2 lines to be connected, i read apilo specificcation,a button must be pressed each time to make a call, but i want it to be fully automated(ie, any one connected to PBX can call the other office using any of the 2 lines). plz help .. thanx

    #20495
    David Ikeda
    Guest

    We have a four port appliance which can be used with your application. Please contact me at david@consortiaenterprises.com

    #20496
    Boman
    Guest

    We have products specifically designed for this case. Pls contact with me.

    bman@tekdigitel.com
    1-301-9167600 ext 102

    #20497
    Khaled
    Guest

    Salam Tarek,
    It is not as hard as you think, you maybe able to do this with your existing PBXs and frame network for conductivity. All you need is one IP pipe from your HQ, and you are set. Email me to tell you how.

    I am a data/ IP specialist with AT&T.

    sukkar@att.com

    #20498
    Sajjad
    Guest

    Salam Khalid

    We have a solution 4 port gateway let me know if you need more details.

    My email is
    sajjad@international-computer.com

    #20499
    Davenelle Mather
    Guest

    We have a Frame-Relay Network and a ATM Backbone at our Hub site. This is a point to point connection. If we need to connect an Ericsson MD110 and an Ericsson BP 250 and run VoIP. The MD110 is at the Head office and the BP 250 at a Branch office what would we need to do. The network is configured with Cisco 3662 and a 2620 Routers. The Frame Relay at the branch office (Access is 1MB and the CIR is 512Kb) for the Data Network. We wish to have 4 to 5 users been able to phone at any given time and talk to the other office.

    What would we require to have an VoIP solution part from having IP handsets and how would you connect up a solution like this ?

    #20500
    C. Savinovich
    Guest

    Besides integrating VOIP Gateways to your PBX, we enhance its usage with additional software that allows PIN access from outside, tremendous long distance rates since you are using our VOIP network, and some handy web based utilities. http://www.itntelecom.com

    CS

    #20501
    Khaled
    Guest

    Davenelle,
    Please Email me directly with your detailed question and I will Email you all the info.

    sukkar@att.com

    #20502
    Stephen
    Guest

    I got same problem, email me on ambidexanthena@hotmail.com

Viewing 9 posts - 1 through 9 (of 9 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.