Sniffer This topic has 4 replies, 1 voice, and was last updated 22 years, 5 months ago by kang zeng. Viewing 5 posts - 1 through 5 (of 5 total) Author Posts 24th April 2001 at 00:14 #20277 BomanGuest Is there any Sniffer which can support H.323, T.38, RTP and so on? Please suggest! firstname.lastname@example.org 24th April 2001 at 09:33 #20278 CyBeRcRaPGuest Hi there , I went to a prenentation on Fluke Optiview, I think that that can sniff H.323, T.38, SIP packers Etc, not 100% sure, could be wrong 30th April 2001 at 04:53 #20279 RUSTY COATESGuest I WOULD REALLY APPRCICIATE A FULL BROCHURE, IF POSSIBLE. THANX RC 31st May 2001 at 17:36 #20280 Hans-Juergen BrandGuest goto http://www.sniffer.com/ for the Version 4.5 is a patch which support H323 and RTCP,RTP 20th June 2001 at 03:56 #20281 kang zengGuest goto http://www.shomiti.com , get surveyor 3.1, which support H.323/SIP very well; Or goto http://www.flukenetworks.com, try to Protocol Inspector 3.2, which is almost same as the above software; Good luck ! email@example.com Author Posts Viewing 5 posts - 1 through 5 (of 5 total) The forum ‘Voice over IP’ is closed to new topics and replies.