- This topic has 71 replies, 1 voice, and was last updated 14 years, 7 months ago by mohamed ali.
23rd August 2006 at 16:23 #38018J-F VezinaGuest
Hi to all!
I work as rbs tech and i was wondering if anybody could send me informationS ABOUT the meaning of LMO code when a rxmsp is done under RXOTRX in winfiole.
THANKS!!!24th August 2006 at 11:15 #38019ljGuest
LMO is Blocking origin of logical managed object. This variable is only printed for managed object instances of class TS, TF, RX and TX. For TRX you don’t get any value.25th August 2006 at 06:20 #38020venuGuest
1)Difference between GSMSC and IWMSC?
A)I understand that GMSC is an MSC for connecting to the PSTN. Is it a seperate MSC dedicated for connecting to the PSTN or is it just a SW function of the MSC?
B)In a mobile network, and that the HLR is assoicated with the GMSC(not the MSCs) while
each MSC with have its own VLR. Is this a usual configuration for a mobile operator?
Any one can reply me Plz?11th September 2006 at 13:43 #38021arshi madanGuest
i am new in switch axe 810 …
what is known as a sp code ??12th September 2006 at 22:50 #38022Bob SmithGuest
SP-Signalling Point, similar to IP addressing21st November 2006 at 16:55 #38023linoGuest
I will like to know how to get through winfiol the number of subscribers in postpaid service. the data which make the difrence with prepaids is oick: 0 for post and 199 for prepaid.
thanks22nd November 2006 at 10:50 #38024mahesh babuGuest
hi arshi madan ,
sp code is like IP address of the switch.28th February 2007 at 05:26 #38025Rajesh KaravadiGuest
What is the difference between ShortMessageSwitchingCenter(SMSC) and MessageSwitchingCenter(MSC),How we can differentiate?13th March 2007 at 13:01 #38026MikeGuest
I am Mike from Samoa, to get a printout for postpaid service cutomers, use this command.
for prepaid customers use
or if your postpaid profile have a different value then use that one, likewise in prepaid profile.
Mike15th March 2007 at 14:30 #38027KOKOSSAÏ RichardGuest
I’m new Axe Engineer. I work for a mobile telephone company in Cameroon. I would like to know about Hardware overview of all nodes(HLR,MSC, BSC). Please Help. Thanks in advance17th March 2007 at 12:23 #38028LinoGuest
Thank you Mike for the answer; the problem is that this command “hglip:sud=oick-0” (in our system for postpaid), gives only the list of the MSISDN of the subscribers that you should copy in excel to get the total number of them. what i need is the command to get directly the total number of postpaid.
Thank you very much!27th May 2007 at 21:37 #38029mohamed aliGuest
hi all is this the first time to jione with you iam ccnp but ilike mobile communication field verry much so imneed to improce my self to be qualified i take many courses in mobile communication 2G and 3G
but ineed more technichal material like BTS config.axe coman if you ca n help me pleas help rgds