Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Cell Planning

Viewing 15 posts - 1 through 15 (of 184 total)
  • Author
    Posts
  • #37273
    Vela
    Guest

    Hi All
    I would like to know more about cell planning in GSM

    I would also like to know what is the ideal distance that should be maintained between 2 cells of same freqency

    #37274
    hi Vela
    Guest

    I will be grateful if you have this question’s answer and send it to me because it is part of my project. Thank you very much.

    #37275
    faris
    Guest

    please (hi vela)..can u send me your project at faris_aas@hotmail.com
    i need many info about GSM
    plz help me

    #37276
    akshay
    Guest

    The ferquency used by the one transmitter can not be reused again until there is enough geographical seperation so that one station does not interfere with another station assigned to that frequency.
    the key to the cellular system is to make efficient use of availaible channels by using LOW POWER TRANSMITTER to allow frequency reuse at much SMALLER DISTANCES.
    NOW CELL is an elementary area .
    the formula for distance between cells using same frequency is..

    D= SQUAREROOT(3K)*R
    where D=distance between the cells
    K=frequency reuse factor
    R= radius of each cell(assuming cells of equal radius)
    ABOVE FORMULA IS DERIVED CONSIDERING geometry of cell. here i have not derived the formula.
    but D is a function of S/I ratio.

    #37277
    WALEED MAHJOUB
    Guest

    I HAVE MANUALS FOR CELL PLANING E-MAIL ME TO KNOW YOUR NEEDS

    #37278
    Waleed Mahjoub
    Guest

    Please can you e-mail to me the manuals for cell planning.

    Thanks,
    Ali Guled

    #37279
    waleed
    Guest

    dear ali i don’t know your adress so send it to me to help you in this

    #37280
    Waleed Mahjoub
    Guest

    My address is as follows:

    810 Bradfield Dr.
    Garland, TX 75042

    Thank you.
    Ali Guled

    #37281
    kshitij
    Guest

    hello
    Mr.Waleed Mahjoub,can u pls forward cell planning manual, to my Email ID.to

    kshitij_u@indiatimes.com

    i would be very grateful
    TY

    #37282
    sussie
    Guest

    hi folks,
    can any one provide me manuals or links abt bsc & bts installation for CDMA
    sussieninan@yahoo.com

    #37283
    waleed
    Guest

    dear ali gueld i asked you your e-mail adress to send you an attachment through the internet and remmember me what is the subject you are asking for…

    #37284
    waleed
    Guest

    dear faris you asked me to help you to know how is the connection between PLMN and the MSC of GSM can be done?usually there are 3 ways of connection :
    1-microwave link.
    2-optical fiber link
    3-twisted 2 wire
    e-mail me for more details…

    #37285
    waled
    Guest

    hi there
    drop me your adress to answer you about the planning,the distance may differ as the output power of TRX of the neighbouring cells and the geografical situation is playing important action too,therefore the frequency reuse is important in GSM cell planning…

    #37286
    wALEED
    Guest

    HI

    #37287
    Krisdiarto
    Guest

    hello
    Mr.Waleed Mahjoub,can u pls send me a cell planning manual, do you have it for cdma2000 ?

    this is my e-mail address
    ke2k@cbn.net.id

    i would be very grateful
    kris

Viewing 15 posts - 1 through 15 (of 184 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.