Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Forced routing based in OICK ET TICK

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #70243
    BENBIHI
    Guest

    Hello Team ,
    I need your help how I can route the call to home operator using based in OICK and TICK ? ( Forced routing from Visited network to Home network MVNE)

    #70244
    Wallis Dudhnath
    Guest

    OIN, TIN, OICK, TICK, Extended OICK, Extended TICK, etc.. is a
    non-standardised way to use DP2 and IN triggering to access an
    IN service / application. Standardised solutions is based on
    CAMEL and the use of x-CSI flags.

    If you want to use OICK / TICK for rout(e)ing then you will need
    to use B-Number Analysis (digit decoder) that is linked to a
    B-Origin and an OICK / TICK configured value. DT – Data Transcript – can
    then be built and tested.

    As this is OICK / TICK, the HPLMN and the VPLMN will need to be from the same vendor, i.e. Ericsson.

    VBR/ Wallis Dudhnath

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.