Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Module to dial, enter pin, close relay?

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #70086
    Sco
    Guest

    Hello, I did not know where to look so I thought I would start here. I am looking for a module that a user can call, enter a code, and change the state of a relay.

    Example:
    1. User calls phone number of module
    2. Prompted to enter unique code
    3. User enters code/pin
    4. Prompted that code was correct (or wrong and try again)
    5. If code is right, close relay (if NO)

    It can be one-way with manual reset or toggle, it does not matter. I would like to be able to program multiple codes in. Like those Customer Support lines that ask for employee ID number to skip the automated system and go straight to tech support.

    Does anyone know where I can find one of these, please?

    #70087
    Wallis Dudhnath
    Guest

    Looks like you are looking at an IVR that interacts with a SALT (Subscriber Apparatus Line Test) equipment.

    Most CSPs have Line Test equipment that is used to test the status of their Lines.

    VBR/ Wallis Dudhnath

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.