Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Command for RSSI Threshold check in Noki

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #70050
    Sarada
    Guest

    Please give me the command for Nokia BSC to check RSSI Threshold set.

    #70051
    hungryforknowledge247
    Guest

    The number of received signal strength indicator (RSSI) samples, needed for a valid RSSI calculation, can be configured using theElement Manager according to the traffic density. The RSSI sample can be configured to values: 80000, 160000 (default),350000 and 750000. The value 80000 is preferred when the BTS is located in a rural area and when the traffic density is low.
    The values 350000 or 750000 are preferred when the BTS is located in an urban area and has high capacity utilization
    . Inareas with intermediate traffic density it is preferred to use the default value 160000.The RSSI sample value may also be configured during the commissioning phase

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.