- This topic has 4 replies, 1 voice, and was last updated 3 years, 8 months ago by hamza.
26th March 2017 at 12:27 #69999hamzaGuest
I have a project that consisted of transmitting data wirelessly from 15 tractors to a station, the maximum distance is 13 miles I used a raspberry pi 3 to collect data from tractors, with some research I found data there is no wifi or GSM coverage so the only solution is to use RF communication using VHF. so is that possible with raspberry pi or I must add a modem? if yes, what is the criterion for choosing a modem? and please if you have any other information tell me?
and thank you for your time.28th March 2017 at 11:16 #70000Wallis DudhnathGuest
Check if your area has 4G/LTE coverage. This will be more suited to handle bursts of data that can be processed by your central Server application. If not then a modem can be attached to your PI-3. The issue is the impact using VHF with other RF frequencies. Interference with other bands is a legal issue.
It is better to look at the PI-3 Community and check if an existing project can be re-used.
If your project is based in IOT – Internet of Things – using M2M then I will be glad to help.
VBR/ Wallis Dudhnath29th March 2017 at 21:22 #70001hamzaGuest
thank you wallis for your replay, in this area there is no GSM or 4G coverage and even wifi coverage. I I have a licenced frequency (400Mhz).
my project consists of sending localisation and speed of tractors and other information.
thank you for your time31st March 2017 at 06:57 #70002Wallis DudhnathGuest
Thanks for your update.
With PI-3 a modem should be added to support VHF. You have a licensed frequency so there should not be issues with your band causing issues with other frequency bands. I am sure you will be able to re-use a VHF Modem project from the PI-3 Community.
Your project is a good example of IOT.
VBR/ Wallis Dudhnath1st April 2017 at 15:49 #70003hamzaGuest
thank you for your support wallis and good luck for you too 😉