Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Reduce RABs and transfer to voice calls

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #69884
    Arun
    Guest

    Can we reduce number of RABs in to give to Voice Calls only.
    Like if we have a 60:40 ratio between Voice and data ? Can we reduce that and give more to voice calls?

    #69885
    Pix
    Guest

    Hello Arun,

    The number of voice calls is “fixed”, in the way that it is exactly the number of calls that are demanded by the subscribers.
    There’s no way you can increase or decrease this number (unless you modify the radio coverage of the cell).

    But you can change the radio rab voice / rab data. It is the number of RAB DATA that you can easily manipulate, by modifying the INACTIVITY timers that control the RAB release.
    Increase the timer and less PS RAB will be needed (PS RAB will be reused, because data transmission is bursty and will reuse the same RAB if it wasn’t already released). The PS RAB duration will be much longer, and even though there are less PS RAB, the overall capacity used by PS RAB will be greater.

    Decrease the timer and more PS RAB will be established, but on the other hand the capacity used by PS RAB will be reduced..

    I hope it makes sense 🙂

    Cheers

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.