Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Lte without QoS implemented

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #69856
    Toto
    Guest

    Hi all,
    I want to ask for help:)
    Can you please give me explanation :
    IF in LTE QoS is not implemented, than how many QCI beares are used. Does the user traffic goes only on Default bearer 9..ot there is also dedicated Non-GBR bearer together with the dafault.
    Thakns in advance

    #69857
    Wallis Dudhnath
    Guest

    QCI will need to be set. The following parameters are key: Bearer Type (GBR / non-GBR), Priority and Packet Delay / Loss.

    Applications (3gPP IMS signalling, VoIP, Video, VoLTE, etc..) can then be aligned.

    VBR/ Wallis Dudhnath

    #69858
    Toto
    Guest

    But in this cause(no QoS implemented)There is not any service priority and the user will use only the default bearer for data. Am I right or not

    #69859
    Wallis Dudhnath
    Guest

    Default bearer will be used.

    Most LTE solutions use PCRF for QoS.

    VBR/ Wallis Dudhnath

    #69860
    Ayat
    Guest

    Hi any one can explian we in some handset like apple.and huawei
    4G + sign does not appear on.the screen ?and I can know my handset support 4G+ from spec. ???
    I know it should support (CA) but which category?

    And for apple also does not disply H+

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.