Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Nokia DX200 switch

Viewing 15 posts - 31 through 45 (of 45 total)
  • Author
    Posts
  • #36948
    muhammad arshad
    Guest

    Dear Alex,
    CB messages are not displayed even locally in BSC means when we want to display some message on a cell by creating it in BSC itself.This is an outstanding issue for us for BSC2i.what may be the problem

    #36949
    Wil
    Guest

    Hi, does DX200 has a default announcement error messages? Thanks

    #36950
    Yohan
    Guest

    Hi Dmitry.

    Would you mind sharing your Nokia Softswitch .inf?

    Thanks.

    br, Yohan.

    #36951
    noname
    Guest

    How to identify(read correctly) the SW version from the used SW build in Nokia MSS or HLR, after using ZWQO:CR; ???

    #36952
    Mouley
    Guest

    Hi, after using ZWQO:CR; from MSS you’ll get information about Running Software Build, it is identified as BU .

    Here is the Identification of SW build states :

    BU = BACKUP (Active SW Build)
    NW = New
    FB = Fall Back
    ….

    from the BU SW Build you get the PACKAGE-ID to identify SW version.

    #36953
    noname
    Guest

    Hi Mouley,
    I know that.
    I ment, how to identify from the package id, what sw release is installed: m12, m13, m13.6, m14 etc.?

    is there a short description, how to define this from the loaded package id?

    thanks again!

    #36954
    Mouley
    Guest

    Hi,

    sorry for misunderstanding.

    So you may have to check the Prefix of your package ID.

    Example:

    Package ID = ME x.y-z
    or
    Package ID = MD x.y-z

    ME = M14 (E in hex = 14 in dec)
    MD = M13 (D in hex = 13 in dec)

    Hope it’ll help.

    Regards.
    Mouley

    #36955
    Sameer
    Guest

    Need help with a BSC2i DX200

    4 issues and would really like any help that you can give.

    1)I need the wiring diagram for converting the LAN POST(RJ45) to D-SUB(9PIN) , The card LAN post( RJ45) is the CPU’s card of the OMU

    2)-The VDC could not login with OMU, So they could not know about the status of the BSC

    3)-Repeat lights of the HWAT card in the OMU show a red light

    4)-The three cards of AS7 in the OMU are constant light

    #36956
    ANJAN DAS
    Guest

    Pls help

    CUG MML Command for DX200

    #36957
    alemnew
    Guest

    How to configure gb interface on Nokia DX 200 iBSC i.e. the Exchange Terminal(ET) that connects the BSC with SGSN?

    #36958
    noname
    Guest

    thanks a lot Mouley

    #36959
    ravi
    Guest

    need dx 200 commands script

    #36960
    Faraz
    Guest

    please provide me the shutdown procedure or command for nokia dx 200 MSS

    #36961
    VIKAS
    Guest

    HI, CAN ANYONE HELP ME TO GIVE THE NOKIA DX 200 AND 220 BASIC UNITS I.E CARDS AND THEIR FUNCTION AS WELL AS COMMANS USED . I M FRESHER IN THIS FIELD.

    #36962
    ronald
    Guest

    somebody can help for implement presence services in nokia dx200 .. I need that for my work…

    thank.. for help me..

Viewing 15 posts - 31 through 45 (of 45 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.