Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Erlang calculator BHT

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #32652
    Yogesh Patel
    Guest

    I am tryng to calculate the maxi. minutes of traffic that can be handled on a incoming system for voice message retrival.

    I used the erlang b and extd erlang b with the following LInes = 1000 recall factor = 50% block rate = 0.07 Using Erlang B i get BHT = 1062.68 = 63761 minutes

    The maximum number of minutes in an hour should be number of line (1000) X 60 = 60,000 How come BHT be more than the number of minutes the system can totally carry.

    #32653
    Westbay Engineers Ltd.
    Guest

    Hello,

    Remember that the B.H.T. figure is the traffic which is OFFERED to the trunk group, NOT the traffic CARRIED by the trunk group.

    The traffic carried is the offered traffic * 1-Blocking:

    1062 * (1-0.07) = 988 Erlangs.

    Now it’s less than 1000 🙂

    Hope that helps,
    Westbay Engineers Ltd.

    #32654
    Subodh
    Guest

    * Please clarify how to calculate BHT?
    * BHT equals to CCS/36 is correct for an particular hour?
    * For an example if incoming CCS is 68 & outgoing CCS is 134 for an particular hour, then as per my understanding total line requirement is 15. Is it correct?

    #32655
    Subodh
    Guest

    Please clairfy relation between CCS, BHT /Erlang

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.