Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

ZTE sdcch drop reason other problem

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #69661
    zico
    Guest

    Hi experts,

    I have sdcch drop reason other problem at ZTE.
    accmin, t200 values are ok. Sdcch drop problem started sharply however all other kpis are normal. There is no ta or traffic change at the site.

    What can be reason?

    we implemented:
    cell restart
    sdcch addition
    sdcch ts change
    frequency & bcch & bsic change
    resel hysteresis change
    re-create NR for 2g-3g
    removing 3g cell re-selection
    t200 modify
    RACH Min.Access Level(dBm) set 10(NW value 6)
    site reload from cdd while creating omcb

    also below possibilities are checked:
    Hardware failure >> no change at other kpis / rsu changed- general hw check done
    Transmission >> there is no site level problem
    Version upgrade >> no upgrade
    Parameter setting >> there is no change and values are default
    Intra-network and inter-network interference >> quality & icm values are ok
    Poor Coverage >> there is no change at ta & traffic
    Imbalance between uplink and downlink >> no change at site

    #69662
    Lex
    Guest

    Hi zico can you elaborate the sdcch drop due to other reason counter.What are included in that counter?

    #69663
    zico
    Guest

    Hi Lex,
    reason: Number of error indications due to T200 expired on SDCCH(Num)

    Also we get trace and we observe ; several times sdcch drop happens when location update happens, while signal level and quality is good. So we also increase resel hsty and even we delete 3g cell re-selection parameter.

    There is only one kpi change while sdcch drop problem happens. Meanholding time increases due to comunication(t200)drops creates waiting time until period finishes.

    Also there is no sdcch traffic type change.

    Also problem not happens 9am-4pm period.

    #69664
    Lex
    Guest

    Hi zico are sdcch drop happening on specific sites or at the boundary cells of the plmn.

    #69665
    Srimanta
    Guest

    Specific Sites only and they are not boundary cells

Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.