Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Reason to define Data TS on BCCH TRX

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #69479
    rf
    Guest

    Dear Experts,

    please let me know why we prefer to define PDCH on BCCH TRX.

    #69480
    SHELDON
    Guest

    The main reason is to obtain higher throughput. Since the BCCH TRX carries most of the signaling channels in the cell, BCCH frequency planning is normally performed with a higher target C/I (in other words, more frequencies). As a result, data channels on the BCCH TRXs will normally have a higher C/I compared to those on non-BCCH TRXs, and by extension, higher data throughput.

    #69481
    rf
    Guest

    Hi sheldon,

    thank you for your valuable i/p, please let me know whether there is any concern of power control…

    #69482
    Tanuj
    Guest

    Hi Rf

    Yes there is a concern of Power because the BCCH TRX will always have the highest power among all TRX in the cell so we create the PD’s on the BCCH.

    Regards
    Tanuj

Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.