Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

ALU-WaitIndicationForCallReestablishment

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #69455
    Suzi
    Guest

    HI Friends,

    Can any One tell me details about this Parameter in ALU,In My network Current value set is 3s.. Can decreasing this help in Improving TCH Drops ?

    #69456
    pix
    Guest

    no, this waiting time is used to reduce SDCCH CONGESTION only, and only if the IMMEDIATE ASSIGNMENT REJECT feature is enabled.

    regards
    pix

    #69457
    Suzi
    Guest

    Thanks Pix,

    Also please tell me if Repeated SACCH/FACCH works properly in ALU B11..Recently we upgraded from B10 to B11. In some of the discussion i have seen that it is not working properly due to some issues with AMR.
    Should i Enable Repeated SACCH/FACCH in Our network with default setting. Or to get Proper Improvement there are some Parameter setting which is recommended for this ?

    Thanks in Advance !!

    #69458
    pix
    Guest

    suzi,

    I think the best way is to try it out by yourself. On my side, i’ve got no specific recommendation. If there is an issue, then :
    1/ it may already be fixed in the release you are using
    2/ if still present, contact alu support, they will … huh… support 🙂

    I’m not in alu anymore, my knowledge is not so up to date…

    Good luck,

    regards

    #69459
    Suzi
    Guest

    Oh Ok !!

    Where are you these days…Which company ?

    #69460
    pix
    Guest

    the swedish blue giant.

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.