Generic selectors
Exact matches only
Search in title
Search in content

OC3 and DS3 engineering

  • This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #32644 Reply
    D. Luke

    Currently we have an OC3 that is provisioned into a 3 DS3’s from AT&T. The local loop provider does not do anything but provide transport (no local circuit ID’s). We use a CAC M23 MUX that keeps receiving Errored seconds. AT&T claims line levels are normalk however the manufacturer says this occurs if the line is hot. We placed a 6DB atenuator on the receive side of the circuit and the errors have gone away however we still receive false winks and call drops sporadicaly.

    Any suggestions on what is causing this problem.

    #32645 Reply
    Tony Sykora

    Sounds like you have 2 timing sources defined. One on the far end and your mux.

Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Reply #32645 in OC3 and DS3 engineering
Your information:

<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">