Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

RF Voice Utilisation>300%

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #69140
    Deepak
    Guest

    Hi everyone

    I have some cells in my network with voice capacity 5 to 6 erl and the traffic carried by them is >20 erl that means they have voice utilisation >300% now i can understand Utilisation uptill 200% with the effect of Half rate tunning and perhaps little more than that owing to the 2% GOS theory but in these specific cases the HR is less than 100% itself and even Tch and SD blocking is not that high upto 1-2%. Can anybody tell me about this phenomenon that how does voice util reaches >300% with all these stats.

    #69141
    pix
    Guest

    hi deepak,

    it’s just not possible (..yet.. VAMOS might change that a little)

    so i would first suspect a KPI issue :
    – check the formula,
    – check how it is aggregated,
    – ensure you’re looking at hourly values and not daily values (sorry! have to be sure),
    – check the raw data and counters definition,
    – check that all raw data are properly retrieved by OSS.

    If all this is correct, then open a fault report to the vendor.

Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.