Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

ZTE Batch commands execution

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #69031
    Dan
    Guest

    Hi all, In ZTE Netnumen u31 we are not able to execute a series of commands(batch) ,whereas single command execution works. Help!

    #69032
    Tanuj
    Guest

    Hi Dan

    In our ZTE iBSC Netnumen, we were not able to run batch commands but we were successful in running batch commands in ISMG.

    Regards
    Tanuj

    #69033
    Dan
    Guest

    Thanks Tanuj!!!

    #69034
    Dan
    Guest

    Tanuj, in ZTE the MML command SYN BTS, the input parameters SubN/W ID and Managed Element ID, on execution whether it will sync the entire BSC or is it equivalent to “Sync modified data”

    #69035
    Tanuj
    Guest

    Hi Dan

    Its equivalent to Sync All Data.

    Regards
    Tanuj

    #69036
    Dan
    Guest

    Tanuj, Thanks!How to sync modified data thru MML ?

    #69037
    Tanuj
    Guest

    Hi Dan

    Its the same command only, it will sync the modified data too.

    Regards
    Tanuj

    #69038
    Rajan
    Guest

    Please try this. Use the NE name as shown in MML.

    eg. SET AMO:Name=MSCS-1;
    SET:NEID=21;
    after that cmd…

Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.